Broan QP430SS, QP436SS, QP442SS warranty Minute Delay OFF, Timer, Feature Menu, Clock Setting

MODELS QP430SS • QP436SS • QP442SS

10-MINUTE DELAY OFF

When your hood fan is on (any speed) press the button to activate the delay off feature. When activated, the hood fan will automatically turn off after 10-minutes has elapsed. The delay feature is active when the following appear on the LED screen: A green indicator illuminated above the delay button, a numeric countdown “10-0”, and a clockwise rotating LED. The delay button can be pressed once again, to stop the delay countdown.

Pressing the button again will resume the delay countdown. Pressing and holding the button will turn off the feature.

TIMER

Press the button to activate the timer setting feature. Use

the and buttons to reduce or advance the timer setting to the desired duration. When the desired timer setting is reached, allow 3 seconds without pressing any additional button or press

the button once again. The timer will then activate, and the countdown will be displayed on the LED screen along with

an green indicator above the button. After the timer has reached “0:00”, an audible beep will be heard. The beep will

continue until the timer button is pressed once again. The timer countdown can be stopped at any time by pressing the once again. Pressing the button again will resume

the timer countdown. Pressing and holding the button will turn off the feature. Note that when both the timer and delay off features are active together, the timer function will be illuminated on the LED display, and the delay off countdown will be active, but not displayed.

FEATURE MENU

Your hood offers many settings that can be accessed and adjusted by scrolling through the feature menu. Your hood fan must be off to be able to activate and access the feature menu. Pressing the button when the hood fan is off will activate the

feature menu. Pressing the button again when the feature menu is active will scroll through the various features that can be adjusted/set. When the feature menu is active, if a button is not pressed within 10 seconds or after scrolling through all menu settings, the feature menu will automatically be exited, and all selected settings will be saved. A green indicator above the icon will illuminate when the feature menu is active. The following features can be adjusted sequentially:

Page 3

CLOCK SETTING

Press the button once, the “hours” will begin blinking in the

LED screen. Use the and buttons to set the appropriate hours for the clock. A small indicator will illuminate in the left corner of the LED screen to designate “pm”. After the hours are

set, press the button to advance the menu to the minute selection. The minutes will begin blinking in the LED screen. Use

the and buttons to set the minutes. Press the button again to advance the menu to select “display” settings.

DISPLAY (default from factory - display ON)

The LED screen will display the display feature -d-. Use the or button to toggle the LED screen on (d on) or off (doFF). When the display off (doFF) feature is selected, the LED display clock

illumination is disabled. Press the button again to advance the menu to select the “Sleep” setting.

SLEEP MODE (default from factory - OFF)

The LED screen will display the “Sleep” feature -S-. Use the or button to toggle the Sleep feature on (S on) or off (S off). When the Sleep on (S on) feature is selected, the LED screen and fan/light LED indicators are disabled. The ambient light sensor, delay-off and timer features will also be disabled. All controls for the fan and light operation, including Heat Sentry, are still active. Press the button again to advance the feature menu to select the “Ambient Light Sensor” setting. Note: To access the feature menu when the Sleep Mode is active, press

and hold the button for 2 seconds.

AMBIENT LIGHT SENSOR (default from factory - Level 1 ON)

There are two level settings for the ambient light sensor. When either of the two settings is active, the light sensor will detect a low level of light in your kitchen, and will automatically turn the task lights on the hood to the night time setting. The other light settings are still functional. If selected when the ambient light sensor is active, they will temporarily overide the ambient light sensor until they are turned off. The level 1(Aon1) ambient light sensor setting will require your kitchen to be more dark than the level 2 (Aon2) setting before activating the night time setting. The LED screen will display the ambient light sensor function -A-. Use the or button to select the light sensor setting Aon1, Aon2, or AoFF. The Off (AoFF) setting deactivates the automatic ambient light sensor feature so the night time light operation is manual.

Note that the feature menu can be exited any time by not pressing any button(s) for 10 seconds or by scrolling through the entire feature menu.