Cannon 4466200024-01 GAS Connection, Connecting to the GAS Supply, Connecting to GAS Supply

Page 29

GAS CONNECTION

CONNECTING TO THE GAS SUPPLY

The cooker is designed to match the depth of standard 600mm work tops. An adaptor backplate should, therefore, be fitted within the shaded area shown in to allow the cooker to be pushed fully to the wall. If a forward facing backplate elbow is used it must be chased into the wall.

	75
225	237
510
190
	540

CONNECTING TO GAS SUPPLY

Connection to the appliance should be made with an approved appliance

flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor. LPG models should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50mbar.

The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70°C.

29

Image 29

Contents Westminster Contents Introduction For Your Safety Leave Unattended While Cooking Guidance on Automatic Cooking Timer OperationAutomatic Cooking Clockface Know Your TimerSetting the Time of DAY Oven Timer OperationAuto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingPlate Rack GrillTo USE the Grill To USE the Oven OvenRoasting of Large Poultry Cold Start CookingStorage and RE-HEATING of Food ‘COOK CHILL’ DishesUsing the ‘SLOW COOK’ Setting for Slow Cooking ‘SLOW COOK’ SettingMeat and Poultry Oven Cooking ChartYeast Mixtures Oven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Oven DoorVitreous Enamel Cooker Part and Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckDisposal of Your Product GAS Safety Installation & USE Regulations Installation InstructionsModel Number 10556G MK2 LocationNatural GAS LPG Models Technical Data DimensionsGeneral Cooker Hoods Space for FixingStability Bracket Unpacking the CookerLevelling FIT Grill PAN Carrier GAS Connection Connecting to the GAS SupplyConnecting to GAS Supply Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Key Contacts