Cannon 4466200024-01 Installation Instructions, Installation and Operational Checks

Page 31

INSTALLATION INSTRUCTIONS

INSTALLATION AND OPERATIONAL CHECKS

After installation, check for gas soundness. The supply pressure can be checked at the grill injector. Access to the injector is by first removing the grill rear panel (4 screws) and the left hand side panel (2 screws). Then remove the 2 fastening screws on the left hand side of the burner and slide the burner off the injector.

Fit the hotplate burner bodies and caps, pan supports and grill pan. Referring to the instructions for use where necessary,

1.Check that the hotplate and grill burners ignite correctly and burn with a steady flame. Check for a steady flame on the low setting.

2.Check that with the oven set to mark 9, the burner ignites at low rate,

and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to the ‘Slow Cook’ setting that the flame reduces.

3.Check the operation of the oven timer and oven light.

Instruct the user on operation of the cooker.

NOTE: On the models manufactured for use with LPG, it is normal for the oven and grill burners to burn with yellow tips.

31

Image 31

Contents Westminster Contents Introduction For Your Safety Leave Unattended While Cooking Automatic Cooking Timer OperationGuidance on Automatic Cooking Clockface Know Your TimerSetting the Time of DAY Oven Timer OperationAuto Cooking Programmes Oven Timer Operation Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingTo USE the Grill GrillPlate Rack To USE the Oven Oven‘COOK CHILL’ Dishes Cold Start CookingRoasting of Large Poultry Storage and RE-HEATING of FoodUsing the ‘SLOW COOK’ Setting for Slow Cooking ‘SLOW COOK’ SettingMeat and Poultry Oven Cooking ChartYeast Mixtures Oven Door Care and CleaningOven Heat Clean Linings Replacement of Oven Light BulbVitreous Enamel Cooker Part and Finish Cleaning MethodSomething Wrong With Your Cooker Problem CheckDisposal of Your Product Location Installation InstructionsGAS Safety Installation & USE Regulations Model Number 10556G MK2General Technical Data DimensionsNatural GAS LPG Models Cooker Hoods Space for FixingLevelling Unpacking the CookerStability Bracket FIT Grill PAN Carrier Connecting to GAS Supply Connecting to the GAS SupplyGAS Connection Connect to a 230-240V A.C. Supply only Electrical ConnectionInstallation and Operational Checks Key Contacts