Installation 
Utility Connections
THE INSTALLATION INSTRUCTIONS CON- TAINED HEREIN ARE FOR THE USE OF QUALI- FIED INSTALLATION AND SERVICE PERSONNEL ONLY. INSTALLATION OR SERVICE BY OTHER THAN QUALIFIED PERSONNEL MAY RESULT IN DAMAGE TO THE OVEN AND/OR INJURY TO THE OPERATOR.
Qualified installation personnel are individuals, a firm, a corporation, or a company which either in person or through a representative are engaged in, and responsible for:
Dthe installation of electrical wiring from the elec- tric meter, main control box or service outlet to the electric appliance.
Qualified installation personnel must be experi- enced in such work, familiar with all precautions required, and have complied with all requirements of state or local authorities having jurisdiction.
U.S. and Canadian installations
All ovens, when installed, must be electrically
grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70
The ventilation of this oven should be in accor- dance with local codes. In the absence of local
codes, refer to the National ventilation code titled, “Standard for the Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment”,
Edition.
General export installations
Installation must conform with Local and National installation standards. Local installation codes and/or requirements may vary. If you have any questions regarding the proper installation and/or operation of your Blodgett oven, please contact your local distributor. If you do not have a local dis- tributor, please call the Blodgett Oven Company at
ELECTRICAL CONNECTION
U.S and Canadian installations
This unit is supplied with a power cord and
WARNING!!
This appliance is equipped with three prong grounding type plug for your protection against shock hazard and should be plugged directly into a properly grounded three prong receptacle. DO NOT cut or remove the grounding prong from this plug.
General export installations
Before making any utility connections to this oven, check the rating plate attached to the back of the oven to be sure the voltage, phase and KW rating are compatible with the electrical services sup- plied for the oven. See the table on page 2 for elec- trical specifications.
THE BLODGETT OVEN COMPANY CANNOT AS- SUME RESPONSIBILITY FOR LOSS OR DAMAGE SUFFERED AS A RESULT OF IMPROPER INSTAL- LATION.
7