Blodgett KCO-25E manual Troubleshooting Guide, Possible Causes Suggested Remedy

Maintenance

Troubleshooting Guide

	POSSIBLE CAUSE(S)		SUGGESTED REMEDY
	SYMPTOM: Blower motor not running
S	No power to oven	S	Press POWER ON/OFF key
S	Door is open	S	Close the door
S	Door switch malfunction	S	*
S	Motor burned out	S	*
	SYMPTOM: Controller displays PROB
S	Short or open temperature probe	S	*
S	Loose probe connections at controller or	S	*
	thermostat
S	Internal problem with controller	S	*
	SYMPTOM: Motor is running: No Heat
S	Loose wire between element and relay	S	*
S	Element burned out	S	*
S	Element relay malfunction	S	*
S	Malfunction in controller or thermostat	S	*
S	Hi limit thermal switch opened	S	*
	SYMPTOM: Oven on --- Control not working
S	Computer controller not properly installed	S	Reinstall
S	Internal problem with computer controller	S	*
S	Thermostat malfunction	S	*
	SYMPTOM: Baking Problems --- Product too light or dark
S	Oven calibration	S	*
S Cook temperature or time not correct for the		S	Adjust the controller recipe program
	product
S Initial raw product temperature not consistent for		S	Adjust the initial product temperature to meet
	programmed product time and temperature		standards

*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, however, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator. Blodgett cannot as- sume responsibility for damage as a result of servicing done by unqualified personnel.

WARNING!!

Always disconnect the power supply before cleaning or servicing the oven.

14