Solid State Digital Control, Oven Controls

Solid State Digital Control

1.POWER ON/OFF - controls the operation of the oven. When lit the power to the unit is on. If the switch is not lit, the power to the unit is off.

2.DISPLAY --- displays time, temperature and other information related to oven function. Time is displayed in minutes and seconds and counts down.

3.START/STOP KEY --- starts or stops the se- lected product key program.

4.PRODUCT KEYS (1-6) --- associates a time and temperature with a specific product for each key.

5.PROGRAM KEY --- accesses the program mode to set or change the time or temperature of a product key.

6.HEAT LIGHT --- indicates that the elements are operating.

Indicates the oven is heating to, or cycling at the idle temperature. (Temperature the oven maintains when not in use).

Indicates the oven temperature is too high for the selected product recipe. Wait until

is displayed.

Indicates the oven temperature is too low for the selected product recipe. Wait until

is displayed.

Indicates the oven has reached the se- lected recipe temperature. Ready for prod- uct load.

Indicates the number of pans of the same product in one load.

Indicates the timer has counted down to 00:00 and the product is done.

Indicates the control is ready to accept the code and enter the program mode.

Indicates the control has entered the pro- gram mode.

Indicates the cook temperature for a prod- uct key can be programmed.

Indicates the cook time for a single pan can be programmed.

Indicates the cook time for two pans can be programmed.

Indicates the cook time for three pans can be programmed.

Indicates an open or shorted probe.

Figure 5