Blodgett MARK V manual Programming the Cook Time, Programming the Cook Temperature

Page 22

Operation

Blodgett IQ2T Control

PROGRAMMING SINGLE STAGE RECIPES Entering the Programming Mode:

1.Press and hold the PROG KEY (10). The top display reads CodE.

2.Use the product keys to enter the program- ming access code: 3 1 2 4. Press the ENTER KEY (14). The top display reads Prod.

3.Press the desired product key followed by the ENTER KEY (14).

NOTE: During the programming process you may: Press the TOGGLE/CLEAR KEY (11) to erase the current setting or toggle be- tween specific settings. Press the SCAN KEY (15) to move to the next programming function keeping the current setting the same. Press the PROG KEY (10) to exit the programming mode.

Programming the Cook Time:

1.The top display reads P1:__. The bottom dis- play gives the current programmed cook time for stage 1 in minutes:seconds. Press the TOGGLE/CLEAR KEY (11). Use the product keys to enter the new cook time. Press the EN- TER KEY (14) to save the new cook time.

2.The top display reads P2:__. The control is asking for the cook time for stage 2 of this rec- ipe. Press the TOGGLE/CLEAR KEY (11) to enter a time of 0:00:00 for P2:.

NOTE: This tells the controller that there are no more stages for this recipe. Once a single stage recipe has been estab- lished the control will only allow en- tries for one stage on all further param- eters for this product.

3.Press the ENTER KEY (14) again. The top dis- play reads P1:. The bottom display shows the cook time.

4.Press the SCAN KEY (15) to advance the pro- gramming mode to cook temperature.

Programming the Cook Temperature:

1.The top display reads Ct ---1. The bottom dis- play gives the current cook temperature. Use the product keys to enter the desired cook temperature.

2.Press the SCAN KEY (15) to advance the pro- gramming mode to fan speed.

Programming the Fan Speed:

1.The top display reads SPd1. The bottom dis- play gives the current fan speed. Press the TOGGLE/CLEAR KEY (11). The bottom dis- play toggles between HI and Lo.

2.Press the SCAN KEY (15) to advance the pro- gramming mode to the fan cycle time.

Programming the Fan Cycle Time:

There are 3 options for fan cycle time: Pulse, Heat and Full. Pulse allows the fan to turn on and off as programmed. Heat allows the fan to operate with heat only. Full provides continuous fan operation.

1.The top display reads CYC1. The bottom dis- play gives the current fan cycle. Press the TOGGLE/CLEAR KEY (11). The bottom dis- play toggles between PULS, HEAt and FULL.

2.If heat or full are selected press the SCAN KEY (15) to save the new fan cycle and advance to timing mode.

If pulse is selected press the SCAN KEY (15) and continue with Steps 3---4 to program the pulse cycle.

3.The top display reads on ---1. The bottom dis- play gives the current pulse on time. Use the product keys to enter the desired pulse on time from 10 to 60 seconds. Press the SCAN KEY (15).

4.The top display reads of ---1. The bottom dis- play gives the current pulse off time. Use the product keys to enter the desired pulse off time from 10 to 60 seconds. Press the SCAN KEY (15) to advance the programming mode to shelf mode.

18

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Mark For Your Safety Reputation YOU can Count on Page Table of Contents Oven Description and Specifications General Export installationsOven Components Delivery and Inspection Delivery and LocationOven Location Oven Assembly NSF BoltsCasters for Single and Double Stacked Ovens Caster AssemblyLEG Attachment Low Profile Casters for Double Stacked OvensDouble Section Assembly Oven LevelingAll ovens, when installed, must be electrically Utility Connections --- Standards and CodesElectrical Connection Initial Startup Adjustments Associated with Initial InstallationOven Restraint Safety Tips Safety InformationFor your safety read before operating General safety tips Control Description Solid State Digital ControlProgramming Cook with Hold OperationCook Only Cook with PulseSolid State Manual Control Blodgett IQ2T Control Component DescriptionOven Operation Single Product Cooking ProcedureMultiple Batch Cooking Procedure Oven StartupOven Cool Down Programming the Fan Speed Programming the Cook TemperatureProgramming the Cook Time Programming the Fan Cycle TimeCheck all Settings see Mode Programming the Timing ModeProgramming Hold Mode Exiting the programming modeOperation Programming the Fan Cycle Time Programming the temperature mode F or C Manager Level Programming Entering the programming modeProgramming the setback mode Programming holdError Codes and Alarms Programming the shelf sensitivityCook and Hold Control Cook and Hold Cool DownPulse Plus Humidaire Intelliplus with Chain Event Control DisplayCook Operation Manual Cook and Hold OperationChain Event Programming Selecting a ProgramProduct Cook Hold Quantity Cook Time Min. Hold Total Time How Cook and Hold WorksHrs Time Hrs General Guidelines for Operating Personnel Operating TipsFish and Seafood Product Temperature Time # Shelves MeatsPoultry CheesePreventative Maintenance Cleaning and Preventative MaintenanceCleaning the Oven Annual MaintenanceTroubleshooting Guide Possible Causes Suggested RemedyCustomer Insert Wiring Diagram Here

MARK V specifications

The Blodgett MARK V is a state-of-the-art convection oven, designed for commercial kitchens that demand precision and efficiency. Known for its robust construction and advanced features, the MARK V has become a favored choice among chefs and culinary professionals striving for consistent results in their cooking processes.

One of the standout characteristics of the Blodgett MARK V is its ability to utilize a patented oven design that promotes even heat distribution throughout the cooking chamber. This technology ensures that food is cooked uniformly, eliminating the hot and cold spots that are often encountered in traditional ovens. The result is perfectly baked goods, roasted meats, and evenly cooked vegetables, enhancing the overall dining experience.

The MARK V is equipped with a powerful blower system that maximizes air circulation and moisture retention. This innovative feature allows for optimal cooking conditions, reducing cooking time while maintaining the integrity of the ingredients. The oven's capacity ranges from one to five decks, making it versatile enough to handle various batch sizes and cooking techniques simultaneously.

Ease of use is another hallmark of the Blodgett MARK V. It boasts a user-friendly digital control panel that allows chefs to easily set temperatures, timers, and cooking modes. With precise temperature controls and programmable features, operators can replicate recipes with confidence, ensuring consistency in every dish. Additionally, the oven is equipped with a built-in steam injection system, enabling chefs to create the perfect crust on artisan breads and pastries while retaining moisture in cooked meats.

Durability is a key consideration in the design of the Blodgett MARK V. Constructed from high-grade stainless steel, the oven is built to withstand the rigors of daily use in a busy kitchen environment. Its easy-to-clean surfaces contribute to efficient maintenance, while the heavy-duty door hinges and double-pane windows allow for durability and ease of access.

The Blodgett MARK V also incorporates energy-efficient technologies, helping kitchens reduce operational costs while promoting environmentally friendly practices. With features like programmable energy-saving modes and precise heat management, the oven delivers high performance without excessive energy consumption.

In summary, the Blodgett MARK V convection oven is an exceptional choice for those in the culinary field seeking reliability, precision, and versatility. With its advanced technologies, user-friendly design, and durable construction, the MARK V continues to set the standard for commercial cooking equipment, enabling chefs to elevate their culinary creations to new heights.
Top Page Image Contents