3.0OPERATION (Continued)
A.Lighting (Continued)
If after 36 seconds the burner fails to ignite or the “ignition light goes out, the system goes into Safety Lockout.
1.Set the thermostat to desired temperature setting. When temperature setting has been reached, the “IGNITION” pilot will go off, turning off the burner. The unit will then cycle on and off to maintain set temperature.
NOTE: When the kettle is tilted a safety switch will automatically turn off gas supply. The kettle will not operate once it has been tilted.
DAILY SHUTDOWN
1.Turn power switch “OFF.”
2.Turn thermostat “OFF.”
COMPLETE SHUTDOWN
1.Turn power switch “OFF.”
2.Turn thermostat “OFF”.
3.Turn power supply to unit “OFF”.
4.Remove front access panel on left side and turn dial on combination valve to “OFF”.
5.Close manual gas shut off valve.
11