Zephyr GU4/MR11, GU5/MR16 Delay OFF Indicator, Clean AIR Indicator, To enable Clean Air Function

Page 11

5.3DELAY OFF INDICATOR (7)

-Delay Off Indicator will light up when Delay Off Function is activated by pressing the Delay Off Button.

-Delay Off Indicator will turn off after the Delay Off Function has completed the five minute cycle or if the user presses the Delay Off Button again or the Power Button.

delay off timer enabled and fan speed changed to 1

5.4CLEAN AIR INDICATOR (8)

-Clean Air Indicator is disabled by default and must be enabled by the user.

-To enable Clean Air Function:

With hood off, hold the Power Button down for five seconds. Clean Air Indicator light will illumi- nate, and the fan will turn on low speed for 10 minutes. After 10 minutes the fan will turn off and the 4 hour timer will begin.

Clean Air Indicator will remain on when Clean Air Function is enabled, even if fan is not on.

-When Clean Air Function is enabled, every four hours of non fan usage the fan will automatically turn on at low speed for 10 minutes. After 10 minutes the fan will turn off and the 4 hour timer will reset.

-When the Clean Air Function automatically turns the fan on the Clean Air Indicator will blink and the Low Speed fan indicator will illuminate.

-If the user changes the fan speed while the Clean Air Function is operating, the Clean Air Indicator will stop blinking but will remain illuminated. When the user manually turns the hood off the 4 hour timer will reset.

-To disable Clean Air Function:

With hood off, hold Power Button down for five seconds until Clean Air Indicator light turns off.

Note1: Changing the fan speed and interrupting the Clean Air Function while it is operating does not disable the Clean Air Function. Clean Air Function will only be disabled by holding the Power Button for 5 seconds

Note2: Turning lights on/off does not disable the Clean Air Function

5. Display Options

clean air function enabled with low fan speed turned on by clean air function

- 11 -

Image 11
Contents User Guide Touch Glass Controls Page Page Contents Please Read Entire Instructions Before Proceeding SafetyImportant Safety Instructions For Residential USE only Installation Instructions General Information Remote ControlSynchronisation OperationKeypad Layout Display Layout User InterfaceFAN Speed Button Power ButtonDelay OFF Button Individual Button FunctionsTo disable Charcoal Filter Replacement Function Light IndicatorFilter Clean and Charcoal Filter Replace Indicator To enable Charcoal Filter Replacement FunctionTo disable Clean Air Function Delay OFF IndicatorClean AIR Indicator To enable Clean Air FunctionFAN Speed Indicator Maintenance For bulb type G4 12V 20W hood models ADU, ADL, and AED Replacing the Light BulbJUN08.0101 Sommaire Commencer PAR Lire Entierement LES Instructions SécuritéInstructions D’INSTALLATION Sécurité Informations Générales TélécommandeFonctionnement Interface Utilisateur Configuration DES Commandes Configuration DE L’ÉCRANTouche FAN Speed Vitesse Turbine Touche Power Allumage / ExtinctionTouche Delay OFF Extinction Différée Fonctions Des TouchesVoyant Lumières Voyant DE Remplacement DU Filtre À CharbonAffichage Sur L’ecran Pour désactiver la fonction d’air propre Voyant D’EXTINCTION DifféréeVoyant D’AIR Propre Fonction AIR Propre Pour activer la fonction d’air propreVoyant Vitesse Turbine Mantenance Remplacement DE L’AMPOULE Índice LEA LAS Instrucciones Completamente Antes DE Proceder SeguridadInstrucciones Para LA Instalacion Seguridad Información General TelemandoSincronización FuncionamientoLayout Botonera Layout Display Interfaz usuarioBotón FAN Speed Velocidad DEL Ventilador Botón Power Encendido / ApagadoBotón Delay OFF Apagado Retrasado Funciones De Cada BotónPara activar la función de sustitución del filtro de carbón Visualización En VisorPiloto DE Luces Piloto DE Sustitución DEL Filtro DE CarbónPiloto DE Aire Limpio Función DE Aire Limpio Piloto DE Apagado RetrasadoPiloto DE Velocidad DEL Ventilador MANTENCIóN Mantención¡ATENCIÓN Sustitución DE LA LámparaIndice Leggere Completamente LE Istruzioni Prima DI Procedere Leggere E Conservare LE IstruzioniSicurezza Istruzioni PER L’INSTALLAZIONESicurezza Telecomando Layout Pulsantiera Layout Display Interfaccia UtenteTasto FAN Speed Velocità Motore Tasto Power Accensione / SpegnimentoTasto Delay OFF Spegnimento Ritardato Funzioni Del Singolo TastoPer attivare la funzione di sostituzione del filtro carbone Visualizzazioni Sul DisplaySpia Sostituzione Filtro Carbone Per disattivare la funzione aria pulita Spia DI Spegnimento RitardatoSpia Aria Pulita Funzione Aria Pulita Per attivare la funzione aria pulitaSpia Velocità Motore Manutenzione Per lampadine tipo G4 12V 20W modelli cappe ADU, ADL e AED Sostituzione Della Lampada DicroicaAttenzione 3LIK0516

GU4/MR11, GU5/MR16 specifications

The Zephyr GU4/MR11 and GU5/MR16 LED lamps represent a significant advancement in lighting technology, catering to both residential and commercial applications. These compact and efficient lights are designed to fit into a variety of fixtures, providing quality illumination while minimizing energy consumption.

The GU4/MR11 lamp is characterized by its small size and low voltage, making it ideal for accent lighting and decorative applications. With a diameter of 35mm, it seamlessly fits into tight spaces and narrow fixtures. The GU5/MR16 lamp, on the other hand, has a diameter of 50mm and is more commonly used for general lighting and spotlighting. Both lamps come with a bi-pin base, allowing for easy installation and replacement in compatible fixtures.

One of the key features of the Zephyr series is its high energy efficiency. These LED lamps consume significantly less power compared to traditional halogen counterparts, leading to reduced electricity bills and a smaller carbon footprint. Additionally, they have a long lifespan, often lasting up to 25,000 hours or more, which reduces the frequency of replacements and contributes to less waste.

In terms of light output, the Zephyr GU4/MR11 and GU5/MR16 lamps offer a range of color temperatures, from warm white (around 2700K) to daylight (upwards of 5000K). This versatility allows users to choose the right ambiance for any setting, whether it’s a cozy living room or a vibrant retail environment. The high Color Rendering Index (CRI) of these lamps ensures that colors appear true and vibrant, enhancing the visual quality of spaces.

Advanced thermal management technology is also a hallmark of the Zephyr series. Their design includes heat sinks that dissipate heat efficiently, which not only improves performance but also extends the lifespan of the LEDs. This is critical for maintaining consistent light output and avoiding the flickering commonly associated with inferior products.

Furthermore, these lamps are compatible with various dimming systems, providing users with greater control over their lighting environment. They seamlessly integrate into smart home systems, allowing for remote control and scheduling, thereby enhancing convenience and energy savings.

In conclusion, the Zephyr GU4/MR11 and GU5/MR16 LED lamps combine innovation and functionality, making them an excellent choice for modern lighting solutions. With their energy efficiency, long lifespan, customizable lighting options, and advanced thermal management, these lamps stand out in the market, setting a high standard for quality and performance in LED lighting.