Installation | d. Fasten the hood to the motor unit using 6 |
| |
| screws from the bottom (release the grease |
| filter to access fixing points. |
15.Hang hood with the 2 mounting hooks.
WARNING
Excessive Weight Hazard - Use two or more people to move and install range hood. Failure to do so can result in back or other injury.
16.Level the appliance, using a carpenters level across
bottom of hood with leveling screws in mounting hooks.
17.Secure hood with 1 screw on bottom.
Duct cover support bracket
Lower support bracket
Hooks
Hooks
bottom screw hole
Rear view
18.Connect ducting to transition. Seal with duct tape.
Do not use duct smaller than the transition.
For Ductless - recirculating - installations only: provide and install a duct to connect hood transition to deflector (the deflector is available as an extra kit).
12