Zephyr AK7548ASX, AK7500ASX, AK7536ASX manual Installation CBI-600B Horizontal Ducting Conversion

Page 14

www.zephyronline.com

Installation – CBI-600B Horizontal Ducting Conversion

HORIZONTAL DUCTING IS ONLY AVAILABLE IF USING THE

CBI-600B SINGLE INTERNAL BLOWER.

1. Unscrew (4) screws holding blower to plate and	2. Cover round blower opening on blower plate
remove blower.	with 6” round metal cap included with the
	CBI-600B. Secure with (3) 3.5x8 screws.
3. Follow instructions on previous page and install
blower plate into hood.

4. On the back of the hood, remove the (6) screws	5. Place round to rectangular transition adapter
holding the rectangular cap to the hood.	inside hood.

12

Image 14

Contents Use, Care, and Installation Guide Page Table of Contents InstallationImportant Safety Notice To Reduce the Risk of Range TOP Grease FireOperation List of Materials Parts SuppliedInstallation Ducting Calculation Sheet Duct pieces Equivalent number Total Length x usedDucting InstallationMounting Height & Clearance Installation Ducting Options Some Ducting OptionsInstallation Speciﬁcations BackCable Lock Installation ElectricalElectrical Mounting the Range Hood This is the top of the board used to hang the hoodInstallation Single and Dual Internal Blowers Installation CBI-600B Horizontal Ducting Conversion Installation CBI-600B Horizontal Ducting Conversion Installation External Blower Preparation CBE-1000 Wiring DiagramFeatures & Controls Touch Controls & Features Blower On/OffStainless Steel Bafﬂe Filters Maintenance Cleaning and Filter RemovalSurface Maintenance Removing Bafﬂe FiltersMaintenance Lights Replacing Light BulbsIssue Cause What to do TroubleshootingTroubleshooting Procedures for Tempest I and Tempest Optional Accessories List of Parts and AccessoriesReplacement Parts DescriptionLimited Warranty