Zephyr AK7536ASX, AK7500ASX, AK7548ASX manual Installation Single and Dual Internal Blowers

PBI-1100A DUAL INTERNAL BLOWER WILL ACCOMODATE VERTICAL DUCTING ONLY

Please turn to page 12 for instructions on installing CBI-600B in horizontal ducting mode.

1. Position blower plate over bracket on inside	2. Connect male end of blower wire to female plug
back of hood and pivot up. Secure plate to hood	in the hood. (plug is located inside the hood
with (2) 10x3/16” screws. (blower pictured is a	behind the control panel)
PBI-1100A)

3.Single Blower – Connect 6” round duct work to blower collar.

Dual Blower – Place 10” round adapter on top of hood and secure with (4) M4x8 screws.

Connect 10” round duct work to 10” round adapter.

Installation – Single and Dual Internal Blowers

11