Bakers Pride Oven ALF-FC service manual Program Product #

Automatic Lift Fryer			Operation
	Table 2. Product Programming Procedure
STEP	ACTION	DISPLAY	COMMENTS
1	Press the FILTER/OFF/FRY	LOW
	switch to FRY.
2	Press PROG on the keypad.	PROGRAM CODE
3	Input 1724 and press ENTER.	PROGRAM PRODUCT #
4	Select the program product	PROGRAM PRODUCT X	X refers to the program
	number (1-8).		number you selected.
5	Press ENTER.	PROGRAM TIME1	This command allows you
		00:00	to specify the cooking time
			for this stage. The time
			displayed may be a
			previously programmed
			value.
6	Press TOGGLE/CLEAR and	PROGRAM TIME1	XX:XX refers to the
	input the number of minutes you	XX:XX	number of minutes you
	want to cook.		input.
7	Press ENTER.	PROGRAM TEMP1	This command allows you
		000 °F	to specify the cooking
			temperature for this stage.
			The temperature displayed
			may be a previously
			programmed temperature.
			The temperature scale
			may also display °C
			depending on the system
			option that is set.
8	Press TOGGLE/CLEAR and	PROGRAM TEMP1	XXX refers to the cooking
	input the cooking temperature for	XXX °F	temperature you input.
	product to be cooked.
9	Press ENTER.	PROGRAM TEMPCOM1	This command enables
		FLEX TIME	you to select whether or
			not time is allowed for the
			fryer to recover from
			temperature loss while
			cooking during this stage.
			The FLEX TIME option will
			allow the fryer to recover
			from temperature loss.
10	Press TOGGLE/CLEAR until the	PROGRAM TEMPCOM1	X refers to the
	desired option is displayed.	X	temperature compensation
			option selected.
11	Press ENTER.	PROGRAM VALVE1	This command allows you
		CLOSED	to specify whether the
			solenoid valve will be open
			or closed during this
			stage.

20