Bakers Pride Oven ALF-FC service manual Step Action Display Comments, ALF and BLF Automatic

Automatic Lift Fryer			Operation
STEP	ACTION	DISPLAY	COMMENTS
12	Press TOGGLE/CLEAR until the	PROGRAM VALVE1	X refers to the solenoid
	desired option is displayed.	X	valve option selected.
			OPEN is used for Models
			ALF and BLF Automatic
			Lift fryers. If your program
			requires the solenoid valve
			to be closed while
			cooking, choose the
			CLOSED option.
13	Repeat steps 5-12 when		The time and temperature
	programming stages 2, 3, 4 and		of each stage has to be
	5 for Electric and Gas appliance		less than the preceding
	types.		stage.
	Repeat steps 5-10 when
	programming stages 2, 3, 4 and
	5 for an ALF appliance type.
14	Press ENTER.	PROGRAM PREALARM	This command allows you
		00:00	to specify the number of
			minutes before the end of
			the cooking time (for each
			stage) until the alarm
			sound The prealarm value
			displayed may be a
			previously programmed
			value.
15	Press TOGGLE/CLEAR and	PROGRAM PREALARM	XX:XX refers to the
	input the prealarm minutes.	XX:XX	prealarm minutes you
			input.
16	Press ENTER.	PROGRAM FILTER	This command allows you
		0	to specify the number of
			fry cycles you want to
			complete for this program
			before a message is
			displayed reminding you to
			filter the shortening (filter
			lockout). The filter value
			displayed may be a
			previously programmed
			value.
17	Press TOGGLE/CLEAR and	PROGRAM FILTER	X refers to the number of
	input the number of fry cycles	X	program cycles you want
	you want to complete before		to complete before filtering
	enabling filter lockout.		the shortening.
18	Press ENTER.	PROGRAM PRODUCT #
19	If you wish to input more
	programs, proceed by pressing
	the next program number and
	follow steps 5 through 18 or
	press PROG to exit the
	programming mode.

21