Lifebreath RNC5-TPD, RNC200, RNC10, RNC95, RNC155 manual Engineering Data HRV Model RNC120D

Engineering Data - HRV Model RNC120D

THERMALLY CONDUCTIVE, PATENTED ALUMINUM CORE

The cross-flow heat recovery core transfers heat between the two airstreams.

It is easily removed for cleaning or service.

MOTORS AND BLOWERS

Each air stream has an independent motorized impeller. 2 speed fan operation.

FILTERS

Washable air filters in exhaust and supply air streams.

MOUNTING THE HRV

Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit.

DEFROST

Recirculating damper defrost system.

CASE

Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent exterior condensation. Drain connections- 1/2" (12 mm) OD.

DUCT CONNECTIONS

5” duct connections.

WEIGHT 42 lbs. (19 kg.) SHIPPING WEIGHT 45 lbs. (20.5 kg.)

CONTROLS - HRV System Control

HRV defaults to LOW SPEED when plugged in. HIGH SPEED option is accessible by connecting remote controls to designated terminals inside electrical box of HRV.

Standard LOW SPEED SETTING can be increased to medium low. Off (Standby)/Low or OFF/HIGH speed operation is also available.

OPTIONAL MAIN CONTROLS (only one main control can be installed on the system)

99-116	Dehumidistat Ventilation Control - Dehumidistat Dial, ON/OFF Switch and
	LOW/HIGH Switch (3 wire) 20 gauge wire (min.) 100' length (max.)
99-2040	20/40 ON/OFF Dehumidistat - Dehumidistat Dial, ON/OFF Switch and 20/40 Switch.
	The 20/40 Switch will toggle from continuous low speed ventilation to intermittent low
	speed ventilation of 20 minutes fan ON and 40 minutes fan OFF. (4 wire) 20 gauge wire
	(min.) 100' length (max.)
99-RECIRC	Recirculation Control - Dehumidistat Dial, ON/OFF Switch and Recirculation Switch.
	The Recirculation Switch will toggle from continuous low speed ventilation to continuous
	low speed recirculation. (4 wire) 20 gauge wire (min.) 100' length (max.)
99-130	Remote Dehumidistat - Dehumidistat Dial only. (2 wire) 20 gauge wire (min.) 100'
	length (max.)
OPTIONAL TIMERS
99-132	20 Minute Fan Timer - initiates high speed ventilation for 20 minutes. (3 wire) 20 gauge
	wire (min.) 100’ length
99-104	Digital Electronic Timer- initiates high speed ventilation for 20, 40 or 60 minutes, (3
	wire) 20 gauge wire (min.) 100' length
99-101	60 Minute Crank Timer - initiates high speed ventilation for up to 60 minutes, (2 wire)
	20 gauge wire (min.) 100' length (max.)

WARRANTY

Units carry a lifetime warranty on the heat recovery core and a 5 year replacement parts warranty.

Performance (HVI certified)

Net supply air flow in cfm (L/s) against external static pressure

E.S.P
(external static pressure)		[cfm (L/s)]
@ 0.1" (25 Pa)		142	(67)
@ 0.2" (50 Pa)		137	(64)
@ 0.3" (75 Pa)		131	(62)
@ 0.4" (100 Pa)		128	(60)
@ 0.5" (125 Pa)		123	(58)
@ 0.6" (150 Pa)		115	(54)
@ 0.7" (175 Pa)		113	(53)
@ 0.8" (200 Pa)		105	(49)
@ 0.9" (225 Pa)		102	(48)
@ 1.0" (250 Pa)		96	(45)
Max. Temperature Recovery		72%
Sensible Effectiveness
@ 70 cfm (33 L/s)	32°F (0°C)	68%
*Sensible Efficiency
@ 70 cfm (33 L/s)	32°F (0°C)	59%
*Sensible Efficiency
@ 67 cfm (32 L/s)	-13°F (-25°C)	56%
VAC @ 60HZ			120
WATTS / Low speed.			70
WATTS / High speed			160
Amp rating			1.5

*Sensible Efficiency - thermal **Latent Efficiency - moisture

Note: Effectiveness - based on temp. differential between the 2 airstreams Efficiency - takes into account all power inputs

	160									3 - High Speed
										*2 - Medium Low Speed
	140	3								*1 - Low speed
	120									* Manufacturers Data
Flow (cfm)	100
	80
Air		2
	60	1
	40
	20
	0	0.1	0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1	1.1	1.2	1.3

Static Pressure (in w.g.)

All units conform to CSA and UL standards

Dimensions	STALE AIR	FRESH AIR	All duct collars are
RNC120D	TO OUTSIDE	FROM OUTSIDE
			5” diameter (127 mm)
inches (mm)
			STALE AIR
			FROM
			BUILDING
	22”		9 1/8”
	(559 mm)		(232 mm)

FRESH AIR

TO

BUILDING Front View (if mounting vertically)

25 1/8”Bottom View (if mounting horizontally)

(637 mm)

Date: _______________________________________________	Contractor: __________________________________________
Tag: __________________________Qty:__________________	Supplier: ____________________________________________
Project: _____________________________________________	Quote#: _____________________________________________
Engineer:____________________________________________	Submitted by: ________________________________________

10 SP-RNC120D