Lifebreath RNC10, RNC200, RNC120D, RNC95, RNC155 manual Engineering Data HRV Model RNC5-TPD

Page 9

Engineering Data - HRV

Model RNC5-TPD

 

 

THERMALLY CONDUCTIVE, PATENTED ALUMINUM CORE

The cross-flow heat recovery core transfers heat between the two airstreams. It is easily removed for cleaning or service.

MOTORS AND BLOWERS

Each air stream has an independent motorized impeller. 2 speed fan operation.

FILTERS

Washable air filters in exhaust and supply air streams.

DEFROST

Recirculating damper defrost system.

CASE

Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent exterior condensation. Drain connections 1/2" (12 mm) OD.

MOUNTING THE HRV

Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit.

DUCT CONNECTIONS

4 - 5” (127 mm) duct connections.

WEIGHT 61 lbs. (28 kg) SHIPPING WEIGHT 64 lbs. (29 kg)

CONTROLS- HRV System Control

HRV defaults to user selected speed from switch on top of cabinet when plugged in. HIGH SPEED option is accessible by connecting remote controls to designated terminals inside electrical box of HRV.

OFF(Standby)/LOW or OFF/HIGH speed operation is also available.

OPTIONAL MAIN CONTROLS (only one main control can be installed on the system)

99-116 Dehumidistat Ventilation Control - Dehumidistat Dial, ON/OFF Switch and LOW/HIGH Switch (3 wire) 20 gauge wire (min.) 100' length (max.)

99-2040

20/40 ON/OFF Dehumidistat - Dehumidistat Dial, ON/OFF Switch and 20/40 Switch.

 

The 20/40 Switch will toggle from continuous low speed ventilation to intermittent low

 

speed ventilation of 20 minutes fan ON and 40 minutes fan OFF. (4 wire) 20 gauge wire

 

(min.) 100' length (max.)

99-RECIRC

Recirculation Control - Dehumidistat Dial, ON/OFF Switch and Recirculation Switch.

 

The Recirculation Switch will toggle from continuous low speed ventilation to

 

continuous low speed recirculation. (4 wire) 20 gauge wire (min.) 100' length (max.)

99-130

Remote Dehumidistat - Dehumidistat Dial only. (2 wire) 20 gauge wire (min.) 100'

 

length (max.)

OPTIONAL TIMERS

99-132

20 Minute Fan Timer - initiates high speed ventilation for 20 minutes. (3 wire) 20

 

gauge wire (min.) 100’ length

99-104

Digital Electronic Timer- initiates high speed ventilation for 20, 40 or 60 minutes, (3

 

wire) 20 gauge wire (min.) 100' length

99-101

60 Minute Crank Timer - initiates high speed ventilation for up to 60 minutes, (2 wire)

 

20 gauge wire (min.) 100' length (max.)

WARRANTY

Units carry a lifetime warranty on the heat recovery core and a 5 year replacement parts warranty.

Performance (H.V.I. certified)

Net supply air flow in cfm (L/s) against external static pressure

E.S.P

 

 

(external static pressure)

[cfm (L/s)]

@ 0.1" (25 Pa)

169

(80)

@ 0.2" (50 Pa)

156

(73)

@ 0.3" (75 Pa)

149

(70)

@ 0.4" (100 Pa)

136

(64)

@ 0.5" (125 Pa)

126

(59)

@ 0.6" (150 Pa)

116

(54)

@ 0.7" (175 Pa)

103

(48)

@ 0.8" (200 Pa)

89

(42)

@ 0.9" (225 Pa)

77

(36)

@ 1.0" (250 Pa)

58

(27)

Max. Temperature Recovery

78%

 

 

 

Sensible Effectiveness

 

 

@ 66 cfm (31 L/s)

32°F (0°C)

74%

*Sensible Efficiency

 

 

@ 66 cfm (31 L/s)

32°F (0°C)

61%

*Sensible Efficiency

 

 

@ 76 cfm (36 L/s)

-13°F (-25°C)

63%

 

 

 

VAC @ 60HZ

 

120

 

 

 

WATTS / Low speed.

 

69

 

 

 

WATTS / High speed

 

147

 

 

 

Amp rating

 

1.7

*Sensible Efficiency - thermal **Latent Efficiency - moisture

Note: Effectiveness - based on temp. differential between the 2 airstreams Efficiency - takes into account all power inputs

 

180

 

 

 

 

 

 

 

3 - High Speed

 

 

 

 

3

 

 

 

 

 

 

 

 

 

160

 

 

 

 

 

 

*2 - Medium Low Speed

 

 

 

 

 

 

 

 

*1 - Low speed

 

 

 

140

 

 

 

 

 

 

 

* Manufacturers Data

 

 

 

 

 

 

 

 

 

 

 

 

120

 

 

 

 

 

 

 

 

 

 

 

(cfm)

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flow

80

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Air

 

1

 

 

 

 

 

 

 

 

 

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.1

Static Pressure (in w.g.)

All units conform to CSA and UL standards

Dimensions

 

 

RNC5-TPD

15”

 

inches (mm)

(378 mm)

 

 

 

 

27”

 

 

(690 mm)

 

 

2-1/4”

 

 

(57 mm)

SPEED

 

 

 

 

SELECTION

 

18-3/4”

SWITCH

 

(475 mm)

 

Date: _______________________________________________

Contractor: __________________________________________

Tag: __________________________Qty:__________________

Supplier: ____________________________________________

Project: _____________________________________________

Quote#: _____________________________________________

Engineer:____________________________________________

Submitted by: ________________________________________

9

SP-RNC5-TPD

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RNC Series Table of Contents IntroductionRNC Electronics Engineering Data HRV Model RNC95 Dimensions RNC95RNC95 Air Flow Variable Port Location / Installation Model RNC95 onlyEngineering Data HRV Model RNC155 Dimensions RNC155Engineering Data HRV Model RNC200 Dimensions RNC200Dimensions Engineering Data HRV Model RNC10RNC10 RNC20 Engineering Data HRV Model RNC20RNC5-TPD Engineering Data HRV Model RNC5-TPDRNC120D Engineering Data HRV Model RNC120DOption 1 Horizontal Duct Configuration Dimensions inches ON/OFF Switch Remote Control Devices Optional Main Control FeaturesOptional Timers Minute TimerSuspending the HRV using Provided Hanging Straps Locating and Suspending the HRV Location SelectionSuspending the HRV Suspending the RNC120D Horizontal InstallationTrap HRV only Drain Connections Drain Connection HRV OnlySimplified Installations Installation Methods Three Methods of InstallationPartially Dedicated Installations Fully Dedicated InstallationsFour Port Models Simplified Installation Return/Return MethodInstallation manual Partially Dedicated InstallationFour Port Models Models RNC155/RNC200 Fully Dedicated InstallationGrilles and Weatherhoods Weatherhood InstallationLifebreath Kitchen Grille Lifebreath TechgrilleElectrical Remote Control ConnectionsChanging OFF to Standby Increasing Low Speed to Medium LowGreen LED Digital Electronic Timer DETFactory Setting Option Defrost Cycle DIP Switch Settings Increasing the Run TimeDamper Defrost 5 port models OFF DFR3Balancing Procedure Air Flow BalancingPrior to balancing, ensure that Duct Air Flow Balancing Pitot Tube and GaugePitot Tube Air Flow Balancing Kit Balancing Collar InstructionsStep ProcedureMagnehelic Door Port Balancing Kit Stale AirInterlocking HRV Operation to an Airhandler/Furnace Blower Defrost Details Wiring Diagrams Model RNC5-TPDWiring Diagrams RNC120D HRV Control Box RNC3 Wiring Diagrams RNC95/RNC10/RNC20/RNC155/RNC200Troubleshooting Symptom Cause Solution HRV Page

RNC155, RNC20, RNC95, RNC120D, RNC10 specifications

Lifebreath is renowned for its commitment to providing high-quality air ventilation products that enhance indoor air quality. Among its popular models are the RNC95, RNC5-TPD, RNC155, RNC10, and RNC200, each offering unique features and technologies tailored to different ventilation needs.

The Lifebreath RNC95 is known for its efficient performance, featuring a high-efficiency heat exchanger that recovers up to 95% of the energy from outgoing air. This model is perfect for residential use, where energy efficiency is paramount. The compact design allows for easy installation, and it is equipped with advanced controls that enable smart operation, ensuring optimal air quality with minimal energy consumption.

On the other hand, the RNC5-TPD is designed for tight spaces without compromising on performance. It provides a versatile solution with a variable speed motor that adjusts airflow to match the specific requirements of the environment. This model also features a quick-change filter system, making maintenance a breeze. Its energy recovery capabilities help reduce heating and cooling costs, appealing to eco-conscious consumers.

The RNC155 stands out due to its robust capacity, catering to larger living spaces or commercial environments. This unit integrates advanced airflow management technology, allowing users to balance air distribution effectively throughout the building. The unit's energy-efficient operation is complemented by integrated controls that can be programmed for optimal performance based on occupancy and air quality levels.

The RNC10 offers a budget-friendly option while maintaining effective ventilation. It is compact and lightweight, making it ideal for smaller rooms or apartments. Despite its size, it features a reliable heat recovery system that significantly lowers energy costs and enhances comfort.

Finally, the RNC200 is a powerhouse model designed for larger commercial spaces. It boasts an impressive airflow capacity, making it suitable for demanding environments. This unit includes sophisticated monitoring systems that provide real-time data on air quality and system performance, ensuring that the air remains fresh and healthy. Additionally, its customizable setup allows for integration with other HVAC systems, further enhancing its functionality.

In summary, Lifebreath models like RNC95, RNC5-TPD, RNC155, RNC10, and RNC200 exemplify cutting-edge ventilation technology. Their distinct features cater to various needs, from residential to commercial applications, ensuring that users enjoy optimal indoor air quality while minimizing energy expenditure.
Top Page Image Contents