·Place the Paper Support Screen in the bottom of the pan.
·Place filter Paper or Pad over screen making sure that there is an equal amount of excess paper on each side.
·Place the Retaining Frame on the paper or pad making sure that all edges are being pressed down evenly.
·Slide filter drawer back under fryer making sure that the oil return pipe locates into its mating connection.
CAUTION:
Be careful when using the clean out rod. Damage to the drain valve may result.
WARNING:
Hot shortening can cause severe injury. Take care when filtering or disposing of hot shortening. Protective gear such as gloves, apron, face shield and sleeves should be worn.
Allow all of the shortening to return to the tank. Bubbles will be produced in the vat when all the shortening has been returned. This means that the return lines have been cleared.
·Close the RED Return Valve, by pushing upward on the Red Return Valve Handle. This will turn the pump off.
·Press the 
key and the Display will show “OFF”.
·Allow the Drain and Return lines to drain for at least 5 minutes before removing filter pan to re- duce dripping.
Your machine is now ready to use.
ENGLISH
4 |