Kobe Range Hoods IS2042GS, IS2036GS manual To Replace Halogen Light Bulbs

To Replace Halogen Light Bulbs

CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.

NOTE: DO NOT TOUCH HALOGEN LIGHT WITH BARE HANDS, WHICH MIGHT CAUSE OVER HEAT AND SHORTEN THE LIFT OF LIGHT BULBS.

￿￿￿￿

1.Make sure all controls are OFF, and range hood is unplugged.

2.Place the flat-head screwdriver into the groove between the halogen light glass covering and the housing ￿.

3.Gently separate glass covering from the housing ￿.

4.Gently pull out the defective light bulb ￿ and discard. Light bulbs should be 12V 20W maximum.

5.Wear a glove or use a cloth to hold the new light bulb and push securely into light socket.

NOTE: DO NOT PUSH TOO HARD OR YOU MAY BREAK THE BULB CONNECTOR.

6.Put back halogen light glass cover ￿.

7.Plug back power cord and turn on range hood to test for operation.

10