Duct Cover Installation
Figure 7
10.Slide glass canopy onto the blower system. Secure glass on the top of range hood with 4 (M5 x 20) screws and 4 washers (provided). (Figure 5)
11.Slide duct cover onto the blower unit, secure underneath the blower unit with 4 (M8) nuts and 4 washers (provided). Refer to Figure 6 and 7.
12.Carefully slide stainless steel collar through duct cover to the top of glass carefully. Refer to Figure 8.
13.With assistance, align the duct cover to the mounting bracket and secure with 5 (M5 x
10)screws (provided). Refer to Figure 9.
Important: Make sure the hood orientation is correct before securing the hood.
14.Slide stainless steel collar towards the top of the duct cover. Refer to Figure 10.
15.Lock stainless steel collar to left or right to secure the stainless steel collar.
16.Peel protective film off the stainless steel collar.
17.Place stainless steel filter in place.
Final Assembly
18.Turn power ON and check all lights and fan operation.
19.Make sure to leave this manual for the homeowner.
7
Figure 8
Figure 9
Figure 10