ENVELOPE MODE
Envelope mode is a special feature of the TRIPLE•C that lets you control the entire compression process in detail allowing full control from the point where the Compressor starts modifying the signal until it releases its grip again.
To select the Envelope mode
•Press the ENVELOPE MODE key in the Spectral Adjust section.
Input Section
Input Level
Adjusts the Input level of the TRIPLE•C. Play your source material through the TRIPLE•C and observe the Input meters in the display. Correct operation level is approx
Dynamic Section
Threshold (1)
When the signal is above the set Threshold point the Compressor is activated and the gain of any signal above the Threshold point is processed according to the Attack and Release settings.
Envelope Attack Gain (2)
This is the level the signal will be boosted/attenuated to in 0.1ms (fixed response time) when the signal exceeds the Threshold.
Attack (3)
The Attack time is the time it takes for the Compressor to reach Threshold level again.
Sustain Period (4)
This is not an adjustable parameter. The signal is sustained at the Threshold level until the Input signal drops below the Threshold point (5).
Release (6)
The Release time Defines the time the Compressor continues to process the signal after the Input signal has dropped below Threshold.
Envelope Release Gain
This is the gain applied to the signal after the signal has dropped below the Threshold point. This can be used e.g. to manipulate the sustain of the signal.
Peak Type
Peak Type is not available in the Envelope mode.
20