TC electronic SDN BHD SDN BHD Look Ahead key, Ratio knob, Attack knob, Envelope Mode key

Page 7

FRONT PANEL

LOOK AHEAD key

When in Multi-band mode the Look Ahead delay (3ms) can be activated allowing even more pre- cise processing.

THRESHOLD knob Multi-band mode: Sets the Mid band Threshold value. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the Threshold value.

Envelope mode: Sets the Threshold of the Envelope.

RATIO knob

Multi-band mode: Sets the Mid band Ratio value. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the compression Ratio.

Envelope mode: No function.

ATTACK knob

Multi-band mode: Sets the Mid band Attack value. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the Attack time.

Envelope mode: Sets the Attack time of the gain added to the start-up of the source.

RELEASE knob Multi-band mode: Sets the Mid band Release time. The Lo/Hi bands are slaved accordingly. Full-range mode: Sets the Release time.

Envelope mode: Sets the Release time of the gain added to the ring-out of the source.

ENVELOPE MODE key

Activates/deactivates the

Envelope mode.

LO-BAND knob

Multi-band mode:

Adjusts the Output level of the processed Lo-Frequency band. Full-range mode: No function Envelope mode: Attack Gain.

HI-BAND knob

Multi-band mode:

Adjusts the Output level of the processed Hi-Frequency band. Full-range mode: No function Envelope mode: Release Gain.

BYPASS key

Bypasses all processing parameters but not the System settings found in the I/O menu. When the key LED is lit the TRIPLE•C is bypassed.

LEVEL knob

Sets the overall Make Up gain through the TRIPLE•C. This is used to compensate for gain loss in the Compressor. The absolute gain through the TRIPLE•C is displayed in the LCD by the fixed LED in the gain meter. Range: +/- 18dB.

MENU key

Push MENU and use the VALUE SET wheel to select menu.

PARAMETER wheel

Scrolls between parameters.

VALUE SET/ENTER wheel Is used to change values. When pushed, actions such as Recall, Store etc. are approved.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Triplec Page Table of Contents Page Introduction Front Panel Attack knob Envelope Mode keyLook Ahead key Ratio knobMidi Cable Rear PanelSingle Version Stereo VersionSignal Flow Triplec Stereo version in a Group Insert Triplec SetupsSetting up the Triplec Triplec in a Digital InsertEQ Insert in the Triplec Sidechain Stereo Setup Using two Triplec Single ChannelsSide Chain On Triplec Display Setup SetupSysEx ID Midi CC Range On/OffProgram bank Bulk DumpStore Recall Edit StoreRecall EditMakeup Gain Section FULL-RANGE ModeInput Section Dynamic SectionExternal Sidechain Edit MenuPeak Type MULTI-BAND ModeSpectral Adjust To select Multi-band modeLo X-Over Makeup GainMeters Hi X-OverSustain Period Envelope ModeTo select the Envelope mode Envelope Attack GainHi X-Over, Lo X-Over and Comp Style are Stereo Link Sidechain OperationExternal EQ Multi-band Compression Using Compression IntroductionCompression in general Compressors vs LimitersBetter Definition of Vocal material Using CompressionSpectral Adjust Section Selecting Full-range or Multi-band modeControlling Percussive Material Hard Compression of Vocal TracksMakeup Gain Voltage Line plug according to standard Important Safety InstructionsFor the customers in Canada ServiceCertificate Of Conformity Appendix Midi Implementation Chart Midi CC Appendix Midi Control ChangesDigital Inputs and Outputs General Appendix Technical SpecificationsPreset List
Top Page Image Contents