Zanussi ZCM 630 manual Description of the Cooker, Fitting the Splash back

Page 4

Description of the Cooker

Semi-rapid burner

Triple-crown (ultra-rapid) burner

Control panel

Splash back

Semi-rapid burner

Auxiliary burner

A

U

T

O

TIMER

ZCG 6000

Shelf

Oven door

Storage drawer

Fitting the Splash back

A stainless steel splash back is supplied with the appliance. This is meant to be fitted on the rear edge of the cooker's hob. The splash back package is in the oven cavity.

1. Unpack the splash back and dispose of the packaging with due regard to safety and the environment.

2. Slide the two bayonets of the splash back into the relevant supports on the rear adge of the cooker's hob.

4

Image 4

Contents

Mixed Fuel Cooker Important Safety Information Contents Description of the Cooker Fitting the Splash backOven Cavity Accessories Control PanelHob burners Using the HobTriple-crown burner 150 Hour Clock and Timer ControlsManual Function Using the Oven Condensation and steamCookware Effects of dishes on cooking resultsUsing the Conventional Oven How to Use the Conventional OvenTop oven element only Hints and TipsCooking Chart Conventional Oven Meat TemperaturesHow to Use Defrosting How to Use the Fan OvenAlways Cook Thoroughly Immediately After Thawing Fan Cooking Chart Defrosting ChartHow to Use the Grill GrillingMaintenance and Cleaning Hob TopPan Supports BurnersOven lamp replacement Cleaning the OvenOven Cavity Symptom Solution Service and Spare PartsSomething Not Working Guarantee Conditions Customer Care DepartmentZanussi Service Force Midlands London & Eastanglia Instructions for the Installer Important Safety RequirementsPositioning the Cooker LocationPositioningtheAppliance Fig Connecting to Gas Fitting the Stability Bracket Not suppliedPermanent Connection Electrical connectionsThis Cooker Must be Earthed Pressure Testing CommissioningTo Adjust the GAS Rate Conversion from Natural to LPG GasCustomer Care