Fitting the Stability Bracket Not supplied

		300 mm.
WALL FACE
			BACK OF COOKER
480 mm.	mm.		ENGAGEMENT EDGE FOR
480 mm.	mm.	LEVELLING FEET	STABILITY BRACKET
	100	LEVELLING FEET	STABILITY BRACKET
	100
			BASE OF COOKER
			A
	PENCIL LINE ON THE FLOOR
		250 mm.
	PLAN VIEW OF THE COOKER		SIDE VIEW
FO 2434	PLAN VIEW OF THE COOKER		OF THE COOKER
Fig. 2		Dimensions are given in millimeters

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See safety Requirements: Page 22).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 250mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

	600
450
130
FO 2435	Fig. 3

Dimensions are given in millimeters

ZCM 630 specifications

The Zanussi ZCM 630 is a modern and efficient freestanding cooker, meticulously designed to enhance your cooking experience. Combining functionality with a sleek aesthetic, this appliance showcases a range of features and technologies that cater to both novice cooks and seasoned chefs alike.

One of the standout features of the Zanussi ZCM 630 is its dual fuel design, which pairs a gas hob with an electric oven. This combination offers the best of both worlds - the precise temperature control of gas cooking for your stovetop and the consistent, even heat of an electric oven. The hob includes four burners, with varying sizes to accommodate different pot and pan sizes, allowing for flexibility while cooking multiple dishes simultaneously. Additionally, the front-mounted controls make it easy to adjust heat levels with precision.

The oven of the ZCM 630 is generously sized, providing ample space for baking, roasting, and broiling. It boasts a range of cooking functions, including fan-assisted cooking, which circulates heat for even cooking results. This feature is particularly beneficial for baking, ensuring evenly risen cakes and perfectly cooked pastries. The oven also presents a grill function, ideal for achieving that satisfying browning on top of your dishes.

Cleaning is made easy with the Zanussi ZCM 630, thanks to its catalytic liners. These liners work by breaking down grease and food splatters at high temperatures, reducing the need for manual scrubbing. This innovative technology ensures that your oven remains in pristine condition with minimal effort.

In terms of safety, the ZCM 630 is equipped with flame failure devices on its gas burners. This safety feature automatically cuts off the gas supply if the flame goes out, providing peace of mind during cooking.

Furthermore, the cooker features a large viewing window and internal lighting, allowing users to monitor cooking progress without the need to frequently open the door and release heat.

Overall, the Zanussi ZCM 630 stands out not only for its stylish design but also for its practical features and modern technologies. Ideal for families or individuals who enjoy cooking, this freestanding cooker combines performance and convenience, making it an excellent addition to any kitchen.

WALL FACE