REAR PANEL
UL1419
EN 60065
PROFESSIONAL
AUDIO
EQUIPMENT
BALANCED INPUTS
LEFT PIN2+/PIN3- RIGHT
BALANCED OUTPUTS
LEFT PIN2+/PIN3- RIGHT
| CAUTION |
|
| WARNING |
|
| SHOCK DO NOT EXPOSE THIS EQUIPMENT TO | ||
|
|
| TO REDUCE THE RISK OF FIRE OR ELECTRIC | |
| RISK OF ELECTRIC SHOCK |
| RAIN OR MOISTURE | |
| DO NOT OPEN |
| AVIS: RISQUE DE CHOC | |
|
|
| OUVRIR. |
|
THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE | TYPE: | |||
CANADIAN | MADE IN DENMARK | |||
COMPLIES WITH PART 15 OF THE FCC RULES. |
|
| ||
OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.
SERIAL NO.
SYNC
IN
DIGITAL AUDIO
DIDO
DI
DO
AES/EBUS/PDIF
RS485
1 | 2 | 3 |
GPI
IN
Main | Power | Balanced | Balanced | Serial | Wordclock | Digital | RS 485 | External |
Power | Input | XLR | XLR | no. | BNC | In/Out | 1, 2, 3 | Control |
Switch |
| Analog | Analog |
|
| AES/EBU |
| Input |
|
| Inputs | Outputs |
|
| S/PDIF |
| (GPI) |
Pin 2 is »hot« on all XLR’s (IEC and AES standards).
Unbalanced Input:
If you are connecting unbalanced equipment to the D22, pins 1 and 3 must be tied together in the cable ends away from the D22. (see fig. 1)
Unbalanced Output:
If the D22’s Outputs are connected to unbalanced equipment pin 3 should not be connected. (see fig 2). If you are using cable types, where pins 1 and 3 are connected (fig. 1), the maximum analog Output will be reduced by 6dB from 26dBu to 20dBu.
Jack (unbalanced) - XLR - Input
Sleeve - Pin 1 (Ground)
Tip - Pin 2 (Hot)
Sleeve - Pin 3 (Cold)
Jack (unbalanced) - XLR - Output | Balanced XLR - XLR | ||||||
Sleeve - Pin 1 (Ground) | Pin 1 | (Ground) | |||||
Tip - Pin 2 (Hot) |
|
|
|
| Pin 2 | (Hot) | |
|
|
| |||||
|
|
|
|
|
| Pin 3 | (Cold) |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 1 | Fig. 2 | Fig. 3 |
8