Front Panel

POWER & MEMORY CARD Electronic POWER switch »Easy touch«

Turn on the unit with a single light touch. To turn off the unit you must press and hold down the POWER key approx. 3 seconds until the display reads “D22”.

PCMCIA MEMORY CARD Copy presets to/from a standard memory card.

CARD TYPES S-RAM Type 1 PCMCIA cards, with a minimum of 64KB and a maximum of 2MB memory.

LED INDICATORS

LEVEL

Shows the Input or Output level for left and right channels.

Select Input or Output metering in Utility.

OVERFLOW Indicates excessive Input level or internal DSP owerflow.

SAMPLE RATE

Indicates at which external Sample Rate the unit is locked to when set to Sync In or Wordclock. Flashing LEDs indicates “no lock”.

DI LOCK

Digital Lock Indicator.

GPI

Incoming pulse detection.

REMOTE IN Indicates incoming Serial Remote Data.

EDITED

Indicates that the current preset has been edited.

TAP KEY

Tap the desired Delay time. Instant (destructive) or Preview (non-destructive) mode can be selected in the Utility menu. Key LED red:

Indicates Instant mode is used Key LED green:

Indicates Preview mode is selected.

NUDGE KEYS

Increases or decreases the

Delay time in increments specified in the Utility menu.

ADJUST WHEEL - DELAY SECTION Increases or decreases the Delay time in increments specified in the Utility menu.