SETUPS
Fig 4
Fig 5
Fig 6
SYNC IN | ANALOG |
D22
DIGITAL
IN
Digital Device
DIGITAL
D22
DIGITAL
IN
Digital Device
Local Wordclock
DIGITALREF
SYNC IN fr om Remote Clock
D22
SYNC IN
DIGITAL
IN
Digital Device
Input: Analog
Sample Rate: Sync.
Output: AES or S/PDIF
Dither: Same as the resolution on the device after the D22.
Installation note:
Wordclock Inputs on the D22 and the down- stream device may be used to enable jitter rejection.
Input: Digital
Sample Rate: EXT DI
Output: AES or S/PDIF
Dither: Same as the resolution on the device after the D22.
Installation note:
Wordclock Inputs on the D22 and the down- stream device may be used to enable jitter rejection.
Input: Digital
Sample Rate: Sync.
Sample Rate Conversion: On
Output: AES or S/PDIF
Dither: Same as the resolution on the device after the D22.
If using both the digital Input and the Sync Input, these must be syncronized.
The Sample Rate on the device after the D22 must be taken from its digital Input unless the Sync Input on this device is used.
11