APPENDIX - Technical specifications
Digital Inputs and Outputs
Connectors:
Formats:
Output Dither:
Word Clock Input:
Sample Rates:
Processing Delay:
Frequency Response DIO:
Sample Rate Conversion
Type:
Dynamic Range: THD+N:
Input Rate Range:
Analog Inputs Connectors: Impedance: Max. Input Level:
Min Input Level (for 0 dBFS): A to D Conversion:
A to D Delay: Dynamic Range: THD:
Frequency Response: Crosstalk:
Analog Outputs Connectors: By-pass: Impedance:
Max. Output Level:
Full Scale Output Range: D to A Conversion:
D to A Delay: Dynamic Range: THD:
Frequency Response: Crosstalk:
EMC Complies with:
Safety Certified to:
Environment Operating Temperature: Storage Temperature: Humidity:
PCMCIA Interface Connector: Standards:
Card Format:
Control Interface
RS485:
GPI, Pedal, Fader:
General
Finish:
LCD:
Dimensions:
Weight: Mains Voltage: Power Consumption: Backup Battery Life: Warranty parts and labor:
XLR (AES/EBU), RCA Phono (S/PDIF)
AES/EBU (24 bit), S/PDIF(24 bit), EIAJ
BNC, 75 Ohm, 0.6 to 10 Vpp 32 kHz, 44.1 kHz, 48 kHz 0.2 ms @ 48 kHz
DC to 23.9 kHz ± 0.01 dB @ 48 kHz
Asynchronous 120 dB
XLR balanced (pin 2 hot)
20 kOhm (balanced)
+27 dBu (balanced)
24 bit (1 bit, 128 times oversampling)
0.8 ms @ 48 kHz
>103 dB (unweighted), >106 dB(A)
XLR balanced (pin 2 hot) Through relay
40 Ohm (balanced)
+26 dBu (balanced)
24 bit (1 bit, 128 times oversampling)
0.57 ms @ 48 kHz
>100 dB (unweighted), >104 dB(A)
EN
IEC 65, EN 60065, UL 1419 and CSA E65
32° F to 122° F (0° C to 50° C)
PC Card, 68 pin type 1 cards
PCMCIA 2.0, JEIDA 4.0
Supports up to 2 MB SRAM
5 Pin DIN
¼ inch phone jack
Anodized aluminum face and top plate. Plated and painted steel chassis 56 x 128 dot graphic
19" x 1.75" x 8.2" (483 x 44 x 208 mm)
5.2 lb. (2.35 kg)
100 to 240 VAC, 50 to 60 Hz
>10 years 1 year
22