Hunter Fan 82022 manual Trouble Shooting

Page 19

Trouble Shooting

Problem: Fan does not come on.

Solution:

Harbor Breeze Fan Bath Ventilators are extremely quiet. To confirm that the fan is running, place your hand near the vents to feel the air movement.

Turn power on, replace fuse, or reset breaker.

Check all plug connections to be sure they are secure.

Check the wiring to make sure it matches the wiring diagram.

Problem: Light does not come on.

Solution:

Replace the light bulb with a new bulb.

Turn power on, replace fuse, or reset breaker.

Check all plug connections to be sure they are secure.

Check the wiring to make sure it matches the wiring diagram.

Problem: Fan is noisy.

Solution:

Check and tighten all fasteners.

Check the glass to make sure it is secure.

Check the flapper to make sure it moves freely.

If you need parts or service assistance, please call 888-830-1326 or visit us at our web site at http://www. hunterfan.com.

42949-01 04/18/2007

19

 

Image 19
Contents Installation I d e U T I O N Check all the parts If damaged, call For replacements Before InstallationRemove the motor/blower from the housing New Construction attaching to joist A11A15 A14A19 A18A21 A22 B15 B11B12 B13B19 B17B26 B27 B22B23 B24C14 Existing Construction accessible from aboveC11 C13 C12C17 C15C16C22 C29 C25C26 C28D13 Existing Construction accessible only from belowD11 D12D17 D18 D16D19 D23 D22Attaching the Grille Complete 42949-01 2007 Trouble Shooting Limited Warranty WarrantyÍ a S t a l a c i ó n V E R T E N C I a Llame al Para obtener un reemplazo Antes de la instalaciónRetire el motor/soplador del alojamiento A11 A12 Tienda los cables a través del manguito de Alivio de tension Vaya al paso A21De pulg Construcción nueva suspendido entre vigasApriete los tornillos B23 B26Construcción existente accesible desde arriba C11 Ventilador Existente SIN Ventilador ExistenteTaladre un agujero en el centro de cada perfil Apriete los tornillos del aliviador de tensiones Vaya al paso En la página 37 para Fijar la rejilla C25 C26Construcción existente accesible sólo desde abajo Levantando a su posición. Asegúrese que los alambres no se DE Iluminación Cuelgue DEL Mazo DE Cables Fijación de la rejillaComplete 42949-02 04/18/2007 Problema El ventilador no está operando Solución Solución de problemasGarantía Limitada GarantíaI d e ’ Installation S E E N G a R D E Avant l’installation Retirer le moteur/souffleur du boîtier Nouvelle construction Fixation à une solive Choisir votre option d’installationPasser les fils par le raccord Marche Nouvelle construction suspendu entre des solives Visser les vis Passer les fils par le raccord B24 B25 C11 Ventilateur Existant Ventilateur NON Existant Construction existante accessible du dessusC18 Serrer les vis du raccord Marche Arrêt Construction existante accessible uniquement du dessous Reposer le moteur en insérant les languettes et en le pous Fixation de la grille Compléter 42949-05 04/18/2007 Dépannage Garantie Limitée Garantie