USE and Maintenance, Fitting the Handle Optional

•FITTING THE HANDLE (OPTIONAL)

Position the handle (M) and the two right (D) and left (S) supports, as indicated in fig. 1, and secure to the hood using the screws provided.

•CHANGINGFROMEXHAUSTINGHOODTOFILTERING ONE

In order to make this change (possible also after the use of the exhausting system), demand a set of carbon filters to your dealer. Active carbon filters are necessary to depurate the air, that will be released in the room. Filters are not washable; they cannot be regenerated and have to be replaced at most every 4 months. The saturation of the activated charcoal depends on the more or less prolonged use of the hood, on the type of cooking and on the regularity of cleaning the grease filter. The filter (C) has to be applied to the aspirating group, which is inside the hood hiting the centre of the group with it and turning it of 90 degrees until the stop click is heard to lock it. Remove the grill (G) to carry out this operation. Close with the appropriate covers the upper and back air outlets; turn the small lever (L) from the position (A) to the position (F). In this way the hood is ready for the filtering function.

USE AND MAINTENANCE

•It is recommended to operate the appliance prior to cooking.

It is recommended to leave the appliance in operation for 15 minutes after cooking is terminated in order to completely eliminate cooking vapours and odours.

The proper function of the cooker hood is conditioned by the regularity of the maintenance operations, in particular, the active carbon filter.

•The anti-grease filters capture the grease particles suspended in the air, and are therefore subject to clogging according to the frequency of the use of the appliance. In order to prevent fire hazard, it is recommendable to clean the filter at a maximum of 2 months by carrying out the following instructions:

- Remove the filters from the cooker hood and wash them in a solution of water and neutral liquid detergent, leaving to soak.

- Rinse thoroughly with warm water and leave to dry. - The filters may also be washed in the dishwasher. The aluminium panels may alter in colour after several washes. This is not cause for customer complaint nor replacement of panels.

•The active carbon filters purify the air that is replaced in the environment. The filters are not washable nor re- useable and must be replaced at maximum every four months. The saturation of the active carbon filter depends on the frequency of use of the appliance, by the type of cooking and the regularity of cleaning the anti-grease filters.

•Clean the fan and other surfaces of the cooker hood regularly using a cloth moistened with denatured alcohol or non abrasive liquid detergent.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE ABOVEWARNINGS.

- 8 -

PN-36 specifications

The Elitair PN-36 is a remarkable addition to the world of aviation, showcasing advanced technologies and innovative design features that set it apart from other aircraft in its class. This aircraft has been engineered to deliver exceptional performance, making it ideal for both commercial and private use.

One of the standout features of the Elitair PN-36 is its aerodynamic design. The aircraft boasts a sleek and streamlined fuselage that minimizes drag and enhances fuel efficiency. With a wingspan optimized for lift and stability, the PN-36 can handle a variety of flying conditions, ensuring a smooth and comfortable ride.

The propulsion system of the PN-36 is another highlight, with cutting-edge engines that deliver powerful thrust while maintaining low fuel consumption. This not only reduces operational costs but also contributes to a lower carbon footprint, aligning with modern goals for sustainable aviation. The engine performance is complemented by advanced noise reduction technologies, ensuring a quieter cabin environment and minimizing the impact on surrounding communities.

Inside, the Elitair PN-36 offers a spacious cabin designed with passenger comfort in mind. The interior can be customized with premium materials, state-of-the-art entertainment systems, and advanced climate control technologies, providing a luxurious flying experience. Additionally, ample storage space is provided for luggage, making it suitable for long-haul flights.

Another key characteristic of the PN-36 is its advanced avionics suite. The aircraft is equipped with the latest navigation and communication systems, enhancing situational awareness and safety during flight. Features such as autopilot capabilities and flight data monitoring ensure that pilots have the support they need for effective decision-making.

Safety is paramount in the design of the Elitair PN-36. The aircraft includes multiple redundant systems, rigorous testing protocols, and compliance with the highest international safety standards. This dedication to safety instills confidence in both pilots and passengers.

In conclusion, the Elitair PN-36 embodies the future of aviation with its blend of performance, comfort, and technological innovation. As an aircraft that prioritizes efficiency and sustainability, it stands out as a preferred choice for those seeking a modern flying experience. Whether for business or leisure, the PN-36 represents a commitment to quality and excellence in air travel.