Faber 280 CFM, 500 CFM installation instructions Install the Rangehood, For Ductless Installations

Page 7

INSTALL THE RANGEHOOD

1. Remove the unit from the carton and place on a flat surface

for assembly. Cover the surface to prevent accidental dam-

age. Remove all parts including the mounting hardware before

discarding the carton.

2. Remove the grease filters from the unit and set aside. The

grease filters are removed by pressing the handle in front of the

filter (FIGURE 7). When replacing, make sure that the filters are

properly positioned with the handles in front and visible.

FIGURE 7

3. Remove the cover from the field wiring compartment. Remove

the wiring electrical knockout using a flat-blade screwdriver. Feed

the Power Supply Cable through the electrical knockout.

4. Hang the canopy on the brackets (1 in FIGURE 8). There are

two rectangular holes on the rear of the canpoy. The brackets

pass through these holes and the canopy hangs from the flanges

on the brackets. Due to the weight of the canopy, two people

should lift it to avoid injuries. Make sure that the canopy is

secure on the brackets before releasing.

5. Level the canopy. The height and level of the canopy can

be adjusted by rotating the adjustment screws (W in FIGURE

8) on each side of the blower inside the rangehood.

FIGURE 8

6.Connect the Power Supply Cable to the rangehood. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector. Connect the Green (Green and Yellow) ground wire under the Green grounding screw.

7.Replace the field wiring compartment cover and the grease filters.

8.For ducted installations, the damper must be attached to the exhaust opening on the top of the canopy. Connect the ductwork and seal all connections with duct tape.

FOR DUCTLESS INSTALLATIONS

Do not use the DAMPER (I In FIGURE 1) for ductless installations. The UPPER CHIMNEY COVER must be installed first, before the LOWER CHIMNEY DUCTLESS.

Ductless installations require a Ductless Conversion Kit. This kit consists of a LOWER CHIMNEY DUCTLESS (A in FIGURE 9) with holes for the exhaust air, a DUCTLESS DIVERTER (C), two VENT GRIDS (B) to cover the holes in the chimney cover, and two CHARCOALFILTERS (D). The DUCTLESS DIVERTER must be installed before the LOWER CHIMNEY DUCTLESS is attached (as indicated by the arrow in FIGURE 9). The LOWER CHIMNEY COVER without holes (B in FIGURE 1) should be discarded.

FIGURE 9

Once the LOWER CHIMNEY DUCTLESS with holes is installed, the VENT GRIDS (B) are inserted into the holes (FIGURE 10).

B

FIGURE 10

Attach the CHARCOAL FILTERS to both sides of the blower (as indicated in FIGURE 11). Install the grease filters.

FIGURE 11

Version 03/08- Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Read and Save These Instructions Lisez Bien Cette Fiche Avant Dinstaller LA HotteFor residential use only Venting RequirementsDuctwork Electrical RequirementsUniquement pour usage menager Règlements DévacuationLe système dévacuation Doit sortir à lextérieur Fiche Technique ÉlectriqueDuctless Conversion Kit Kit Pour Conversion Du Conduit Replacement Charcoal Filters/Filtres au CharbonHigh Backsplash/Dosseret 24 po High Backsplash/Dosseret 30 poPlan the Installation Tools Needed for InstallationParts Supplied for Installation Parts Needed for InstallationCooking surface Installation DimensionsOn the wall where the rangehood will be installed Prepare the WallFor Ductless Installations Install the RangehoodReplacing the Lamps CleaningUSE and Care Information For Best ResultsSpeed 280 CFM Models Control Panels and Wiring DiagramsFaber Warranty & Service Save for Your Records Outils Nécessaires À L’INSTALLATION Plan DE L’INSTALLATIONProtéger des dommages et de la poussière Dimensions d’installatioNSont Bien Installées AU MUR Préparation DU MURInstallations Sans Conduit Installation DE LA HotteNettoyage Remplacement de la lumière halogèneUtilisation ET Entretien Pour de meilleurs résultatsEnregistrez Votre Information Ci-dessous

280 CFM, 500 CFM specifications

Faber, a respected name in the kitchen ventilation industry, brings innovation and functionality to home cooking with its range of powerful range hoods, including the Faber 280 CFM and 500 CFM models. These hoods are designed to efficiently eliminate smoke, steam, and odors from your kitchen, enhancing not only the cooking experience but also the overall atmosphere of your home.

The 280 CFM range hood is an ideal choice for smaller kitchens or for those who don’t cook frequently. Despite its compact size, this model packs a punch with its impressive airflow capacity of 280 cubic feet per minute. This ensures that cooking odors and airborne grease particles are quickly drawn away, leaving your kitchen fresh and clean. The low-profile design is perfect for modern kitchen spaces while still providing maximum functionality. This model often features user-friendly controls, allowing for easy operation of fan speeds and lighting adjustments.

On the other hand, the Faber 500 CFM range hood caters to serious home chefs and larger kitchen spaces. With an impressive airflow capability of 500 CFM, it is equipped to handle the demands of heavy cooking. This model is particularly beneficial for those who regularly use gas ranges and generate significant heat and smoke. The robust motor is designed for quiet operation, ensuring that you can enjoy your culinary creations without the disruptive noise common in many traditional hood models.

Both the 280 CFM and 500 CFM range hoods incorporate advanced technologies such as LED lighting, which provides energy-efficient illumination for your cooking area. This feature not only enhances visibility but also adds a modern touch to your kitchen aesthetics. Additionally, these models often include dishwasher-safe filters, making maintenance a breeze. The stainless steel construction of these range hoods ensures durability and resistance to scratches and tarnishing, leading to a longevity that surpasses many competitors in the market.

With their blend of high performance, stylish design, and advanced features, the Faber 280 CFM and 500 CFM range hoods stand out as excellent choices for any home chef looking to elevate their kitchen experience. Whether you opt for the compact efficiency of the 280 CFM or the powerful performance of the 500 CFM, Faber's commitment to quality ensures that your cooking environment remains clean and pleasant.
Top Page Image Contents