Hearth and Home Technologies HRV200PLUS specification

HRV200PLUS INSTALLATION INSTRUCTIONS

b.Install Fresh Air Supply Ducting

The inner and outer liners of the insulated duct must be clamped to the sleeve of the weatherhood as close to the outside as possible and to the plastic inlet port on the HRV200PLUS. It is very important that the fresh air intake line be given special attention to make sure it is well sealed. A good bead (½”) of high quality caulking (preferably acoustical sealant) will seal the inner duct to both the HRV port and the weatherhood prior to clamping.

To minimize air flow restriction, the flexible insulated duct (if used) that connects the outside weatherhood to the HRV200PLUS should be stretched tightly and be as short as possible.

Twisting or folding the duct will severely restrict air flow. See Figure 2 for the recommended connection of insulated ducts to the outside weatherhood and the HRV200PLUS.

Ducting must be installed in accordance with local codes.

2.Warmside Air Supply - Heated fresh air from the HRV into the living area

Duct Materials: Insulated Metal Air Duct - rigid or flexible, 200°F rated

CoolVent™ Flexible Pipe may be used.

Duct Adapter - (Simplified Installation)Figure 2

Diffusers or Grilles - 200°F rated (Dedicated Installation)

Note: Due to elevated temperatures in the fresh air supply duct:

•Use only ducting materials rated for use at or above 200°F

•Do not use plastic duct or terminations rated below 200°F.

•Do not connect fresh air supply duct into the return duct work of the furnace. Hot air stream could damage exposed components in the furnace return cabinet.

•WHEN USING THE EXISTING DUCT WORK FOR AIR DISTRIBUTION, ALWAYS CONNECT TO THE SUPPLY DUCT WORK DOWNSTREAM OF THE CENTRAL FURNACE OR AIR HANDLER.

a.Duct the Warmside Air Supply

The HRV200PLUS recovers heat from the fireplace normally wasted in the flue. This means that the temperatures achieved in the fresh air stream to the home will typically be 100°F hotter than the outdoor ambient temperature. Under some operating conditions, the temperature inside the fresh air supply duct could be as high as 200°F.

The fresh air should be supplied to all living areas and bedrooms, excluding bathrooms, kitchens and utility areas. The fresh air supply may be delivered to the home through a dedicated duct system when:

1)No central forced air system exists,

2)The HRV200PLUS is not in close proximity to the central supply air ducts or

3)Heating load design factors favor dedicated supply registers.

When dedicated supply grilles are used, grilles that diffuse the air comfortably from high wall or ceiling locations are recommended.

In homes with a forced air distribution system, direct connection to the furnace supply duct work is the preferred method for supplying fresh air from the HRV200PLUS. This will ensure fresh air is delivered evenly throughout the house and utilizes the existing duct work infrastructure.

When connected to the furnace supply air duct work, the duct adapter should be installed to insure reliable air flow and stable operation of the HRV200PLUS. The duct adapter is designed to minimize the effects of static pressure in the duct regardless of the furnace blower speed selection and allows for fast, easy and airtight connections.

Remember to check the air flow balance of the HRV200PLUS with the furnace fan both on and off to determine that it does not imbalance the ventilator more than 10%.

4034-102 Rev F

02/04

HRV200PLUS specifications

The Hearth and Home Technologies HRV200PLUS is an advanced heat recovery ventilator (HRV) designed to provide optimal indoor air quality while ensuring energy efficiency. As homes become increasingly airtight due to modern construction techniques, the importance of proper ventilation grows. The HRV200PLUS addresses this need by continuously exchanging stale indoor air with fresh outdoor air, effectively maintaining a healthy living environment.

One of the standout features of the HRV200PLUS is its innovative heat recovery technology. This system captures the heat from the outgoing air and transfers it to the incoming fresh air. As a result, the air being brought into the home is pre-warmed, reducing the demand on heating systems during the colder months. This energy-efficient method helps homeowners save on heating costs while maintaining comfort levels inside the home.

Another notable characteristic of the HRV200PLUS is its quiet operation. Equipped with high-performance, low-noise fans, this unit operates in silence, ensuring that occupants can enjoy a peaceful environment without the disruptive sounds often associated with ventilation systems. Additionally, the HRV200PLUS provides versatile installation options, allowing it to be easily integrated into both new and existing homes.

The unit features adjustable settings that allow users to customize airflow according to their specific needs. With multiple fan speeds, homeowners can choose the most suitable option for their daily activities, ensuring an ideal balance between indoor air quality and energy use. Furthermore, the HRV200PLUS includes a built-in filter system that captures dust, allergens, and other airborne particles, enhancing overall air quality.

Durability and ease of maintenance are also keys in the design of the HRV200PLUS. Constructed with high-quality materials, this unit is made to last, reducing the need for frequent replacements. The filters are easily accessible, making periodic maintenance straightforward, which further extends the product's lifespan.

In summary, the Hearth and Home Technologies HRV200PLUS stands out as a premium choice for homeowners seeking a reliable and efficient ventilation solution. Its combination of heat recovery technology, quiet operation, customizable settings, and easy maintenance make it an ideal option for improving indoor air quality while keeping energy costs in check. As the emphasis on healthy living spaces continues to grow, the HRV200PLUS remains a practical investment for modern homes.