Hearth and Home Technologies HRV200PLUS manual

Figure 10

HRV200PLUS INSTALLATION INSTRUCTIONS

3.Vertical Termination (see Figure 11)

a.Install the B-Vent roof support per the manufacturer’s installation instructions. Insure proper use of necessary flashing and firestop spacers as required by the vent manufacturer.

b.Install a CoolVent™ Universal Adapter to the end of the flexible pipe as described in Step 4b, page 15.

c.Install an adequate length of rigid B-Vent pipe into the roof support to provide the minimum height from the roof to the bottom of the cap as shown in Figure 12 and Table 1. Secure the rigid pipe in the roof support.

d.Place a ½” bead of RTV in the receiving end of the appliance adapter and insert the end of the rigid B-Vent pipe. Secure the hose clamp to the pipe. Reference Figure 5 and inset in Figure 10 for RTV and hose clamp placement.

e.Use aluminum duct tape to seal all seams of the rigid B-Vent exposed below the roof line.

f.Typical Vertical Termination (see Figure 10)

•At least 10’ (3m) from the ventilation air intake.

•At least 18” (457mm) above the roof line or above the depth of expected snow accumulation.

•At least 3’ (1m) away from the corner of the building.

•Not near a gas meter, electric meter or a walkway where fog or ice could create a hazard.

•Not into a garage, workshop or other enclosed space.

•When installing the termination cap, its outside perimeter must be sealed with exterior caulking.

4034-102 Rev F

02/04

HRV200PLUS specifications

The Hearth and Home Technologies HRV200PLUS is an advanced heat recovery ventilator (HRV) designed to provide optimal indoor air quality while ensuring energy efficiency. As homes become increasingly airtight due to modern construction techniques, the importance of proper ventilation grows. The HRV200PLUS addresses this need by continuously exchanging stale indoor air with fresh outdoor air, effectively maintaining a healthy living environment.

One of the standout features of the HRV200PLUS is its innovative heat recovery technology. This system captures the heat from the outgoing air and transfers it to the incoming fresh air. As a result, the air being brought into the home is pre-warmed, reducing the demand on heating systems during the colder months. This energy-efficient method helps homeowners save on heating costs while maintaining comfort levels inside the home.

Another notable characteristic of the HRV200PLUS is its quiet operation. Equipped with high-performance, low-noise fans, this unit operates in silence, ensuring that occupants can enjoy a peaceful environment without the disruptive sounds often associated with ventilation systems. Additionally, the HRV200PLUS provides versatile installation options, allowing it to be easily integrated into both new and existing homes.

The unit features adjustable settings that allow users to customize airflow according to their specific needs. With multiple fan speeds, homeowners can choose the most suitable option for their daily activities, ensuring an ideal balance between indoor air quality and energy use. Furthermore, the HRV200PLUS includes a built-in filter system that captures dust, allergens, and other airborne particles, enhancing overall air quality.

Durability and ease of maintenance are also keys in the design of the HRV200PLUS. Constructed with high-quality materials, this unit is made to last, reducing the need for frequent replacements. The filters are easily accessible, making periodic maintenance straightforward, which further extends the product's lifespan.

In summary, the Hearth and Home Technologies HRV200PLUS stands out as a premium choice for homeowners seeking a reliable and efficient ventilation solution. Its combination of heat recovery technology, quiet operation, customizable settings, and easy maintenance make it an ideal option for improving indoor air quality while keeping energy costs in check. As the emphasis on healthy living spaces continues to grow, the HRV200PLUS remains a practical investment for modern homes.