Zanussi ZCG560G Environment concerns, Levelling, Gas, Adjustment of the ad Justment screw

Page 15

Change of the type of

gas

From natural gas to liq- uid gas

From liquid gas to nat- ural gas

Adjustment of the ad-

justment screw

Fully tighten the adjust- ment screw in.

Release the adjustment screw approximately 3/4 of a turn.

1.Remove the bottom plate of the oven cavity (A) to get access to the oven burner (B).

2.Release the screw (C) which keeps the burner in po- sition.

3.Carefully move the burner off the injector support (D).

Slowly move it to the left side. Make sure that the burner bush stays on the burner mouthpiece. Do not apply force to the wire of the thermocouple conduc- tor (F).

4.Release the injector (D) with a 7 mm socket spanner and remove it. Replace it with the necessary one.

5.Assemble the burner in opposite sequence.

6.Replace the gas type sticker near the gas supply

ramp with the one related to the new gas type.

Minimum level adjustment of the gas oven burner:

1.Remove the oven control knob.

2.Adjust the adjustment screw (A) with a thin-bladed screwdriver.

A

3.Attach the oven control knob.

4.Light the oven burner. Refer to "Gas oven cooking: Ignition of the gas oven burner".

5.Set the oven control knob to maximum and let the oven heat for a minimum of 10 minutes.

6.Turn the oven control knob from maximum to mini- mum.

Control the flame. If the flame goes out, do the procedure from point 1 to point 6 again. There must be a small regu- lar flame on the oven burner crown.

The manufacturer declines liability if you do not obey these safety measures.

Levelling

Use small feet on the bottom of appliance to set same lev- el of cooker top surface with other surfaces

Environment concerns

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential

www.zanussi.com

negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

15

Image 15
Contents ZCG560G Safety information ContentsUse LidDo not apply pressure on the open door Disposal of the appliance Care and cleaningService centre Product descriptionHob Daily use Before first useEnergy savings Hob Care and cleaningHob Helpful hints and tips Turning the burner offTurning off the oven burner Oven Daily useOven Functions Gas oven cookingBaking cakes Oven Using the accessoriesOven Helpful hints and tips Inserting the baking trayCooking times Oven Care and cleaning Cleaning the oven doorInformation on acrylamides What to do if… Possible causeRemedy By-pass diameters InstallationMinimal distances Location of the appliancePressure Mbar Inj. diameter Cons Flexible nonmetal pipes connectionGas burners Type of gasOven injector replacement Adjustment to different types of gasInjectors replacement Adjustment of minimum levelGas Adjustment of the ad Justment screwEnvironment concerns LevellingCH Garantie, Garanzia, Guarantee Servicestellen Points de ServiceCucina/Vendita Page Page Page 892942646-D-452011