Zanussi ZVH 66 F manual Using the child safety device, Switching on the child safety device

Page 10

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Step	Control panel	Display/Signal
1.	Switch on appliance. (Do not set
	a heat setting.)
2.	Touch for 4 seconds

The child safety device is switched on.

Switching off the child safety device

Step	Control panel	Display/Signal
1.	Switch on appliance. (Do not set
	a heat setting.)
2.	Touch for 4 seconds	lights up
3.	Switch appliance off.

The child safety device is switched off.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking session; it remains activated afterwards.

Step		Control panel	Display/Signal
1.	Switch appliance on
2.	Touch	for 4 seconds	lights up

Until the appliance is next switched off, it can used as normal. After switching off the appliance, the child safety device is active again.

3After overriding the child safety device, a heat setting or a function must be set with- in approx. 10 seconds, otherwise the ap- pliance automatically switches itself off.

10

Image 10

Contents User Information Ceramic glass Hob ZVH 66 FContents Safety instructions Cooking surface layout How to avoid damage to the appli- anceDescription of the Appliance Glass ceramic can be damaged by ob- jects falling onto itTouch Control sensor fields Control panel layoutSensor field Function Displays Residual heat indicatorCooking zone is switched off Display DescriptionSwitching the outside ring on and off Switching the appliance on and offSetting the heat setting Operating the applianceLocking/unlocking the control panel Control panel DisplaySwitch on Touch After 5 seconds Using the automatic warm-up functionControl Possible heat Display Panel Settings Switch off Touch Not usedSwitching off the child safety device Using the child safety deviceSwitching on the child safety device Overriding the child safety devicePower Management Function Condition Outcome after Using the timerSelecting a cooking zone Step Control panel DisplayDisplaying the time remaining for a Setting the timeChanging the time Cooking zoneHeat setting Switches off after Automatic switch offSwitching off the acoustic signal Before being used again, the cooking zone must be set toCookware Tips on Cooking and FryingEnergy saving Examples of cooking applica- tions Tips/HintsRemoving deposits Cleaning and CareCleaning the appliance after each use Take care! Risk of burns from residual heatProblem Possible cause Remedy What to do if …Number are displayed Electronics fault DisposalSticking on the seal Safety instructionsClean the worktop around the cut-out area Use strain relief clamp on cableAssembly Page Page Page Rating Plate Page Service Model description PNC867 202 414-A-040808-01