Zanussi ZVH 66 F Cleaning and Care, Cleaning the appliance after each use, Removing deposits

Page 17

Cleaning and Care

1Take care! Risk of burns from residual heat.

1Warning! Sharp objects and abrasive cleaning materials will damage the appli- ance. Clean with water and washing up liq- uid.

1Warning! Residues from cleaning agents will damage the appliance. Re- move residues with water and washing up liquid.

Cleaning the appliance after each use

1.Wipe the appliance with a damp cloth and a little washing up liquid.

2.Rub the appliance dry using a clean cloth.

Removing deposits

1.Place a scraper on the glass ceramic surface at an angle.

2.Remove residues by sliding the blade over the surface.

3.Wipe the appliance with a damp cloth and a little washing up liquid.

4.Rub the appliance dry using a clean cloth.

			Remove
		immedi- when the appliance has
	Type of dirt	immedi- when the appliance has		using
	Type of dirt	ately	cooled down	using
		ately	cooled down

	sugar, food containing sugar	yes	---	a scraper*
	plastics, tin foil	yes	---	a scraper*
	plastics, tin foil	yes	---
	limescale and water rings	---	yes
	fat splashes	---	yes	cleaner for glass ceramic
	fat splashes	---	yes	or stainless steel*
				or stainless steel*
	shiny metallic discolouration	---	yes

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops

3Remove stubborn residues with a cleaner for glass ceramic or stainless steel.

3Scratches or dark stains on the glass ce- ramic that cannot be removed do not how- ever affect the functioning of the appliance.

17

Image 17

Contents ZVH 66 F User Information Ceramic glass HobContents Safety instructions Description of the Appliance How to avoid damage to the appli- anceCooking surface layout Glass ceramic can be damaged by ob- jects falling onto itSensor field Function Control panel layoutTouch Control sensor fields Cooking zone is switched off Residual heat indicatorDisplays Display DescriptionSetting the heat setting Switching the appliance on and offSwitching the outside ring on and off Operating the applianceControl panel Display Locking/unlocking the control panelControl Possible heat Display Panel Settings Using the automatic warm-up functionSwitch on Touch After 5 seconds Switch off Touch Not usedSwitching on the child safety device Using the child safety deviceSwitching off the child safety device Overriding the child safety devicePower Management Selecting a cooking zone Using the timerFunction Condition Outcome after Step Control panel DisplayChanging the time Setting the timeDisplaying the time remaining for a Cooking zoneSwitching off the acoustic signal Automatic switch offHeat setting Switches off after Before being used again, the cooking zone must be set toEnergy saving Tips on Cooking and FryingCookware Tips/Hints Examples of cooking applica- tionsCleaning the appliance after each use Cleaning and CareRemoving deposits Take care! Risk of burns from residual heatWhat to do if … Problem Possible cause RemedyDisposal Number are displayed Electronics faultClean the worktop around the cut-out area Safety instructionsSticking on the seal Use strain relief clamp on cableAssembly Page Page Page Rating Plate Page Model description PNC Service867 202 414-A-040808-01