Zanussi ZVH 66 F Using the timer, Selecting a cooking zone, Function Condition Outcome after

Page 12

Using the timer

Function	Condition	Outcome after the
		time has elapsed

Automatic cut-out	a heat setting is set	acoustic signal
		00 flashes
		Cooking zone switches off
Countdown timer	cooking zones not in use	acoustic signal
		00 flashes

3If a heat setting is set on this cooking zone in addition to a countdown timer, the cook- ing zone is switched off after the time set has elapsed.

3If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

Step	Control panel		Display
1.	Touch	once	Pilot light of the first cooking zone

			flashes
2.	Touch	once	Pilot light of the second cooking


			zone flashes
3.	Touch	once	Pilot light of the third cooking zone


			flashes
4.	Touch	once	Pilot light of the fourth cooking zone


			flashes

3If the pilot light is flashing more slowly, the heat setting can be set or modified.

3If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.

12

Image 12

Contents User Information Ceramic glass Hob ZVH 66 FContents Safety instructions How to avoid damage to the appli- ance Description of the ApplianceCooking surface layout Glass ceramic can be damaged by ob- jects falling onto itControl panel layout Touch Control sensor fieldsSensor field Function Residual heat indicator Cooking zone is switched offDisplays Display DescriptionSwitching the appliance on and off Setting the heat settingSwitching the outside ring on and off Operating the applianceLocking/unlocking the control panel Control panel DisplayUsing the automatic warm-up function Control Possible heat Display Panel SettingsSwitch on Touch After 5 seconds Switch off Touch Not usedUsing the child safety device Switching on the child safety deviceSwitching off the child safety device Overriding the child safety devicePower Management Using the timer Selecting a cooking zoneFunction Condition Outcome after Step Control panel DisplaySetting the time Changing the timeDisplaying the time remaining for a Cooking zoneAutomatic switch off Switching off the acoustic signalHeat setting Switches off after Before being used again, the cooking zone must be set toTips on Cooking and Frying CookwareEnergy saving Examples of cooking applica- tions Tips/HintsCleaning and Care Cleaning the appliance after each useRemoving deposits Take care! Risk of burns from residual heatProblem Possible cause Remedy What to do if …Number are displayed Electronics fault DisposalSafety instructions Clean the worktop around the cut-out areaSticking on the seal Use strain relief clamp on cableAssembly Page Page Page Rating Plate Page Service Model description PNC867 202 414-A-040808-01