Zanussi ZVH 66 F manual Setting the time, Changing the time, Displaying the time remaining for a

Page 13

Setting the time

Step	Control panel		Indicator
1.	Select	cooking zone	Pilot light for the cooking zone selected flashes
2.	Touch	or	00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function

Step	Control panel		Indicator

1.	Select	cooking zone	Pilot light of cooking zone selected flashes faster
			Time remaining is displayed
2.	Touch		The time remaining counts backwards to 00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Changing the time

Step	Control panel		Indicator
1.	Select	cooking zone	Pilot light of the selected cooking zone flashes fast-
			er
			Time remaining is displayed
2.	Touch	or	01 to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a
cooking zone

Step	Control panel field		Display

1.	Select cooking zone		Pilot light of the cooking zone selected flashes fast-
			er
			The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

13

Image 13

Contents ZVH 66 F User Information Ceramic glass HobContents Safety instructions Description of the Appliance How to avoid damage to the appli- anceCooking surface layout Glass ceramic can be damaged by ob- jects falling onto itTouch Control sensor fields Control panel layoutSensor field Function Cooking zone is switched off Residual heat indicatorDisplays Display DescriptionSetting the heat setting Switching the appliance on and offSwitching the outside ring on and off Operating the applianceControl panel Display Locking/unlocking the control panelControl Possible heat Display Panel Settings Using the automatic warm-up functionSwitch on Touch After 5 seconds Switch off Touch Not usedSwitching on the child safety device Using the child safety deviceSwitching off the child safety device Overriding the child safety devicePower Management Selecting a cooking zone Using the timerFunction Condition Outcome after Step Control panel DisplayChanging the time Setting the timeDisplaying the time remaining for a Cooking zoneSwitching off the acoustic signal Automatic switch offHeat setting Switches off after Before being used again, the cooking zone must be set toCookware Tips on Cooking and FryingEnergy saving Tips/Hints Examples of cooking applica- tionsCleaning the appliance after each use Cleaning and CareRemoving deposits Take care! Risk of burns from residual heatWhat to do if … Problem Possible cause RemedyDisposal Number are displayed Electronics faultClean the worktop around the cut-out area Safety instructionsSticking on the seal Use strain relief clamp on cableAssembly Page Page Page Rating Plate Page Model description PNC Service867 202 414-A-040808-01