Zanussi ZVH 66 F manual Displays, Residual heat indicator, Display Description

Page 6

Displays

	Display	Description
		Cooking zone is switched off
	Keep warm setting	Keep warm setting is set
-	Heat settings	Heat setting is set
	Automatic warm up function	Automatic warm-up function is activated
	Fault	Malfunction has occurred
	Residual heat	Cooking zone is still hot
	Child safety device	Lock/child safety device is engaged
	Automatic switch off	Switch off is active.

Residual heat indicator

1Warning! Risk of burns from residual heat. After being switched off, the cooking

zones need some time to cool down. Look at the residual heat indicator .

3Residual heat can be used for melting and keeping food warm.

Image 6

Contents User Information Ceramic glass Hob ZVH 66 FContents Safety instructions Cooking surface layout How to avoid damage to the appli- anceDescription of the Appliance Glass ceramic can be damaged by ob- jects falling onto itControl panel layout Touch Control sensor fieldsSensor field Function Displays Residual heat indicatorCooking zone is switched off Display DescriptionSwitching the outside ring on and off Switching the appliance on and offSetting the heat setting Operating the applianceLocking/unlocking the control panel Control panel DisplaySwitch on Touch After 5 seconds Using the automatic warm-up functionControl Possible heat Display Panel Settings Switch off Touch Not usedSwitching off the child safety device Using the child safety deviceSwitching on the child safety device Overriding the child safety devicePower Management Function Condition Outcome after Using the timerSelecting a cooking zone Step Control panel DisplayDisplaying the time remaining for a Setting the timeChanging the time Cooking zoneHeat setting Switches off after Automatic switch offSwitching off the acoustic signal Before being used again, the cooking zone must be set toTips on Cooking and Frying CookwareEnergy saving Examples of cooking applica- tions Tips/HintsRemoving deposits Cleaning and CareCleaning the appliance after each use Take care! Risk of burns from residual heatProblem Possible cause Remedy What to do if …Number are displayed Electronics fault DisposalSticking on the seal Safety instructionsClean the worktop around the cut-out area Use strain relief clamp on cableAssembly Page Page Page Rating Plate Page Service Model description PNC867 202 414-A-040808-01