Zanussi ZVH 66 F manual Automatic switch off, Switching off the acoustic signal, Hours

Page 14

Switching off the acoustic signal

Step	Control panel field	Acoustic signal
1.	Touch	Acoustic signal to acknowledge.
Acoustic signal stops.

Automatic switch off

Cooking surface

•If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking sur- face automatically switches itself off.

•If one or more sensor fields are covered by objects (a pan, cloths, etc.) for longer than approx. 10 seconds, a signal sounds and the cooking surface switches off automatically.

•If all cooking zones are switched off, the cooking surface automatically switches itself off after approx. 10 seconds.

Cooking zones

•If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. is displayed.

Before being used again, the cooking zone must be set to .

Heat setting	Switches off after
v, 1 - 2	6 hours
3 - 4	5 hours
5	4 hours
6 - 9	1.5 hours

14

Image 14

Contents User Information Ceramic glass Hob ZVH 66 FContents Safety instructions Cooking surface layout How to avoid damage to the appli- anceDescription of the Appliance Glass ceramic can be damaged by ob- jects falling onto itSensor field Function Control panel layoutTouch Control sensor fields Displays Residual heat indicatorCooking zone is switched off Display DescriptionSwitching the outside ring on and off Switching the appliance on and offSetting the heat setting Operating the applianceLocking/unlocking the control panel Control panel DisplaySwitch on Touch After 5 seconds Using the automatic warm-up functionControl Possible heat Display Panel Settings Switch off Touch Not usedSwitching off the child safety device Using the child safety deviceSwitching on the child safety device Overriding the child safety devicePower Management Function Condition Outcome after Using the timerSelecting a cooking zone Step Control panel DisplayDisplaying the time remaining for a Setting the timeChanging the time Cooking zoneHeat setting Switches off after Automatic switch offSwitching off the acoustic signal Before being used again, the cooking zone must be set toEnergy saving Tips on Cooking and FryingCookware Examples of cooking applica- tions Tips/HintsRemoving deposits Cleaning and CareCleaning the appliance after each use Take care! Risk of burns from residual heatProblem Possible cause Remedy What to do if …Number are displayed Electronics fault DisposalSticking on the seal Safety instructionsClean the worktop around the cut-out area Use strain relief clamp on cableAssembly Page Page Page Rating Plate Page Service Model description PNC867 202 414-A-040808-01