Using the automatic warm-up function
All cooking zones are equpped with an auto- matic warm up function When setting a heat
setting using 
, when starting from 
, the cooking zone switches to full power for a cer- tain amount of time and then automatically switches back to the heat setting set.
| Control | possible heat | Display |
| panel | settings |
|
|
|
|
|
Switch on | Touch | to | (after 5 seconds) |
(only when starting at |
|
|
|
) |
|
|
|
Switch off | Touch | to / | to |
Not used | Touch | to | to |
|
|
|
|
3If during the automatic warm up 
a high- er heat setting is selected, e.g. from 
to 
, the automatic warm up is adjusted.
3If there is still residual heat on the cooking zone (display 
), the automatic warm up is not performed.
3If the power of a cooking zone is reduced by the Power Management, the automatic warm up for this cooking zone is ended.
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat setting | Length of the automatic warm up [min:sec] |
v | 0:30 |
1 | 1:00 |
2 | 1:40 |
3 | 4:50 |
4 | 6:30 |
5 | 10:10 |
6 | 2:00 |
7 | 3:30 |
8 | 4:30 |
9 | |
|
|
9