Zanussi ZDI 600 QX manual Cleaning the spray arms, External cleaning, Internal cleaning

Page 19

Clean filters A, B and C thoroughly under running water.

Turn the handle about 1/4	Remove filter A from the
turn anticlockwise and re-	base of the washing com-
move filters B and C.	partment.

Replace the filters and lock by turning the handle clockwise to the stop.

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or sol- vent (acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the de- tergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run the wash programme for heavy soiled dishes using de- tergent but without dishes.

Prolonged periods of non- operation

If you are not using the machine for any pro- longed period of time you are advised to:

1.Unplug the appliance and then turn off the water.

19

Image 19

Contents Dishwasher ZDI 600 QX Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationLanguage Option menu DisplayOption submenu Select and start a washing programme Symbols have the following meaningWashing programmes Cancel a delay start or a washing programme in progressEnd of the washing programme Plate Warmer Prewash First useClarke Water hardness Mmol/l Set the water softenerUse of salt Setting electronically Setting the water softener manually see tableUse of dishwasher salt Use of rinse aid Load cutlery and dishes Adjusting the dosage of rinse aidAre not suitable Are of limited suitabilityMaximum height of the dishes Upper basket Adjusting the height of the upper basketLower basket To move to the higher position proceed as follows Use of detergentDetergent tablets Multitab functionCleaning the filters Care and cleaningUnloading the dishwasher Prolonged periods of non- operation Cleaning the spray armsExternal cleaning Internal cleaningPackaging material Frost precautionsEnvironment concerns Moving the machineWhat to do if… Possible cause and solutionDisplay message and malfunction Wash results are not satisfactory Consumption values Technical dataFitting under a counter InstallationFull load 12 standard place settings Hints for test institutesLevelling Water inlet hose with safety valveWater connection Electrical connection Drain hosePage 117972120-012008