Zanussi ZDI 600 QX manual Language

Page 5

IMPORTANT!

A sequence of displayed and audible signals will guide you in the setting up of the appliance, the selection of washing programmes and options. Follow the instruc- tions that appear in the display.

Scrolling button

This button has a double function:

selecting within "programme menu",

selecting within "option menu" and "submenu".

OK button

Is necessary to:

confirm / memorize any option,

start a washing programme.

Delay start button

Allows the start of the washing programme to be delayed from 1 hour to 19 hours.

The countdown will decrease with steps of 1 hour. Only in the last hour the decrease is in minutes.

Once the countdown has elapsed the washing programme will start automatically.

IMPORTANT!

The "Option" and "Delay start" buttons if pressed simultaneously can:

cancel a washing programme in progress,

cancel the setting of an option

It is also possible to return to the factory setting for the following options:

LANGUAGE

BRIGHTNESS (factory setting level 10)

In setting mode press for about 6 seconds these 2 buttons simultaneously; the default language message will appear in the display.

Option button

press this button to enter a menu of options; press again to exit from the menu:

How to set the options

1.Press "Option" button.

2.Press "Scrolling" button until desired op- tion is displayed.

3.Press "OK" to confirm and enter submenu.

4.Press "Scrolling" button until required submenu is displayed.

5.Press "OK" to confirm.

6.To exit from the menu press "Option" but- ton.

Switching on for the first time - setting the language

1.Press "On/Off" button.

2.In the display appears the default language message.

If you want to confirm the default language press "OK"

3.If you want to set a different language; use the "Scrolling" button until the required language appears in the display.

Press "OK" to confirm.

5

Image 5
Contents Dishwasher ZDI 600 QX Contents General safety Safety informationChild safety Correct useControl panel InstallationLanguage Option submenu DisplayOption menu Select and start a washing programme Symbols have the following meaningEnd of the washing programme Cancel a delay start or a washing programme in progressWashing programmes Plate Warmer Prewash First useUse of salt Set the water softenerClarke Water hardness Mmol/l Use of dishwasher salt Setting the water softener manually see tableSetting electronically Use of rinse aid Load cutlery and dishes Adjusting the dosage of rinse aidAre not suitable Are of limited suitabilityLower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basket To move to the higher position proceed as follows Use of detergentDetergent tablets Multitab functionUnloading the dishwasher Care and cleaningCleaning the filters External cleaning Cleaning the spray armsInternal cleaning Prolonged periods of non- operationEnvironment concerns Frost precautionsMoving the machine Packaging materialDisplay message and malfunction Possible cause and solutionWhat to do if… Wash results are not satisfactory Consumption values Technical dataFull load 12 standard place settings InstallationHints for test institutes Fitting under a counterWater connection Water inlet hose with safety valveLevelling Electrical connection Drain hosePage 117972120-012008