Zanussi ZDI 600 QX manual Technical data, Consumption values

Page 23

Technical data

Dimensions

Electrical connection Voltage - Overall power - Fuse

Water supply pressure

Capacity

Width x Height x Depth (cm)

59,6 x 81,8-89,8 x 57,5

Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door.

Minimum	0,05 MPa (0,5 bar)
Maximum	0,8 MPa (8 bar)
place settings	12

Consumption values

The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the var-

iations of the power supply and the amount of dishes.

Consumption values

Programme		Programme duration (in	Energy consumption (in	Water (litres)
		minutes)	kWh)
Automatic		*	1,1 - 1,7	12 - 23
Quick 60°		*	0,9	9
Quick 55°		*	1,0 - 1,2	11 - 12
Intensive 70°		*	1,6 - 1,8	22 - 24
Eco 50° (Test pro-		*	1,0 - 1,1	12 - 13
gramme for Test Insti-
tutes)
Glass 45°		*	0,8 - 0,9	14 - 15
Plate Warmer		*	0,8	4
Prewash		*	0,1	4

*The programme duration is visible in the digital display when the washing programme is selec- ted.

23

Image 23

Contents Dishwasher ZDI 600 QX Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationLanguage Option submenu DisplayOption menu Select and start a washing programme Symbols have the following meaningEnd of the washing programme Cancel a delay start or a washing programme in progressWashing programmes Plate Warmer Prewash First useUse of salt Set the water softenerClarke Water hardness Mmol/l Use of dishwasher salt Setting the water softener manually see tableSetting electronically Use of rinse aid Load cutlery and dishes Adjusting the dosage of rinse aidAre not suitable Are of limited suitabilityLower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basket To move to the higher position proceed as follows Use of detergentDetergent tablets Multitab functionUnloading the dishwasher Care and cleaningCleaning the filters Prolonged periods of non- operation Cleaning the spray armsExternal cleaning Internal cleaningPackaging material Frost precautionsEnvironment concerns Moving the machineDisplay message and malfunction Possible cause and solutionWhat to do if… Wash results are not satisfactory Consumption values Technical dataFitting under a counter InstallationFull load 12 standard place settings Hints for test institutesWater connection Water inlet hose with safety valveLevelling Electrical connection Drain hosePage 117972120-012008