Zanussi ZDI 600 QX Washing programmes, Cancel a delay start or a washing programme in progress

Page 8

Cancel a delay start or a washing programme in progress

1.Press simultaneously both Option and De- lay start buttons.

2.The message CONFIRM CANCEL ? is displayed.

3.Press OK button to confirm.

4.The appliance returns to setting mode and the message CHOOSE PROGRAMME is displayed.

•If a delay start is cancelled, also set the washing programme has been cancelled.

•If a new washing programme is set, check that there is detergent in the detergent dispenser.

•Close the dishwasher door; the programme will continue from the point at which it was interrupted.

End of the washing programme

•The dishwasher will automatically stop and an acoustic signal informs you of the end of the washing programme.

•The messages PROGRAMME FINISHED alternated with PLEASE SWITCH OFF are displayed.

1.Press the On/Off button.

2.Open the dishwasher door.

Leave the door ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved

Interrupt a washing programme in progress

•Open the dishwasher door; the programme will stop. The message PLEASE CLOSE DOOR is displayed.

Washing programmes

Programme

Automatic

1)

60° Quick

2)

Degree of soil

Normal soil

Light soil

Type of load

Crockery, cutlery, pots and pans

Crockery and cutlery

Programme description

Prewash Main wash

1 or 2 intermediate rinses Final rinse

Drying

Main wash

Final rinse

8

Image 8

Contents Dishwasher ZDI 600 QX Contents Safety information General safetyChild safety Correct useInstallation Control panelLanguage Option submenu DisplayOption menu Symbols have the following meaning Select and start a washing programmeEnd of the washing programme Cancel a delay start or a washing programme in progressWashing programmes First use Plate Warmer PrewashUse of salt Set the water softenerClarke Water hardness Mmol/l Use of dishwasher salt Setting the water softener manually see tableSetting electronically Use of rinse aid Adjusting the dosage of rinse aid Load cutlery and dishesAre of limited suitability Are not suitableLower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basket Use of detergent To move to the higher position proceed as followsMultitab function Detergent tabletsUnloading the dishwasher Care and cleaningCleaning the filters Cleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operationFrost precautions Environment concernsMoving the machine Packaging materialDisplay message and malfunction Possible cause and solutionWhat to do if… Wash results are not satisfactory Technical data Consumption valuesInstallation Full load 12 standard place settingsHints for test institutes Fitting under a counterWater connection Water inlet hose with safety valveLevelling Drain hose Electrical connectionPage 117972120-012008