Zanussi ZDI 600 QX manual Control panel, Installation

Page 4

Installation

Check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier.

All packaging must be removed before use.

Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.

For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.

Never use the dishwasher if the electrical supply cable and water hoses are damaged;

Control panel

or if the control panel, work top or plinth area are damaged such that the inside of the ap- pliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.

All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.

CAUTION!

For electrical and water connection carefully follow the instructions given in specific para- graphs.

7

1.On/Off button

2.Programme selection button

3.Option button

4.Delay start button

5.Scrolling button

6.OK button

7.Display

4

Image 4
Contents Dishwasher ZDI 600 QX Contents Safety information General safetyChild safety Correct useInstallation Control panelLanguage Option menu DisplayOption submenu Symbols have the following meaning Select and start a washing programmeWashing programmes Cancel a delay start or a washing programme in progressEnd of the washing programme First use Plate Warmer PrewashClarke Water hardness Mmol/l Set the water softenerUse of salt Setting electronically Setting the water softener manually see tableUse of dishwasher salt Use of rinse aid Adjusting the dosage of rinse aid Load cutlery and dishesAre of limited suitability Are not suitableMaximum height of the dishes Upper basket Adjusting the height of the upper basketLower basket Use of detergent To move to the higher position proceed as followsMultitab function Detergent tabletsCleaning the filters Care and cleaningUnloading the dishwasher Cleaning the spray arms External cleaningInternal cleaning Prolonged periods of non- operationFrost precautions Environment concernsMoving the machine Packaging materialWhat to do if… Possible cause and solutionDisplay message and malfunction Wash results are not satisfactory Technical data Consumption valuesInstallation Full load 12 standard place settingsHints for test institutes Fitting under a counterLevelling Water inlet hose with safety valveWater connection Drain hose Electrical connectionPage 117972120-012008