B)TO START COOKING NOW, THEN SWITCH OFF AUTOMATICALLY
Follow the first two points as A) above then:
iii)Turn the selector (A) to 'End Time'. The
display will show 00.00 and the cookpot ( ) symbol will be lit. Turn setting knob
(B)until the time is shown when you want the food to stop cooking e.g. 12.00 noon Fig. 10.
iv) The cookpot ( ) symbol will stay lit and the 'AUTO' symbol will glow.
v)Set the oven temperature and multifunction selector on the oven as required.
vi)You may leave the selector (A) at the 'End Time'. This will display the amount of cooking time remaining.
Alternatively, turn selector (A) to 'Automatic'. The time of day will appear in the display. Fig 11. At any time you can turn the selector
(A)to 'End Time' to see the time remaining.
vii)At the end of the cooking time an audible signal will be heard.
viii)To cancel the signal, turn setting knob (B). The display will show 00.00 when the selector (A) is turned to 'Cook Time. Fig. 12. When the selector (A) is set at 'Automatic' the display will show time of day and the 'AUTO' symbol will flash.
ix)To return the oven to manual, turn the selector (A) to 'Manual'.
5.TO CANCEL AN AUTOMATIC PROGRAMME
Turn the selector (A) to 'Cook Time' and turn setting knob (B) until 00.00 shows in the display. The AUTO display will flash.
Return to 'Manual' by turning selector (A). The oven will now operate manually.
6. NOTES FOR AUTOMATIC COOKING
It is advisable to leave food in the oven for as short a time as possible before automatic cooking. Always ensure commercially prepared food is well within its use by date and that home prepared food is fresh and of good quality.
When cooking is complete, do not leave food to stand in the oven, but remove and cool it quickly if the food is not to be consumed immediately.
Always ensure food in the oven has been covered before cooking, if it is not possible to remove food immediately after cooking.
Fig.10
Fig.11
Fig.12
38