Tricity Bendix BD 921 installation instructions HOW to SET the Oven Timer Control

Release the minute minder button and the display will return to the time of day after 5 seconds.

During the operation of the minute minder, the remaining time period can be shown in the display by pressing the minute minder button (-----) as Fig. 5.

The minute minder will sound intermittently for up to 2 minutes and the bell symbol will flash at the end of the timed period. The sound can be stopped by pressing any of the 4 left hand side buttons.

3.HOW TO SET THE OVEN TIMER CONTROL

When using the timer control for the very first time, it is advisable to let it operate while you are at home. The displays can be checked to show that it is operating correctly and you will feel confident to leave a meal to cook automatically in the future.

A)TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY

i)Ensure the electricity supply is switched ON and that the correct time of day is displayed, e.g. 9.a.m. as Fig. 6.

ii)Place food in oven.

iii)To set the length of cooking time, press the

cooking hours button ( ) press the increase control ( + ) until the required length of cooking time is displayed, e.g. 2 hrs 15 mins as Fig. 7. If necessary depress the decrease control ( - ) until the correct time interval is achieved.

iv)Release the buttons. The AUTO display and cooking symbols will glow.

Remember, this must be completed within 4 seconds of first pressing the cooking hours button.

v) Set the STOP time. Press the stop time button ( ), press the increase control ( + ) until the required stop time is displayed, e.g. 12.15p.m. as Fig. 8. If necessary depress the decrease control ( - ) until the correct time interval is achieved.

vi)Release the buttons. The cooking symbol will go out and the time of day will be displayed after 5 seconds.

Fig.5

Fig.6

Fig. 7

A

U

T

O

Fig. 8

A

U

T

O

40