Tricity Bendix TBG700 user manual Burners, Ignition electrode

Page 11

The Burners

The burner caps and crowns can be removed for cleaning.

Wash the burners caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove.

After cleaning, be sure to wipe dry with a soft cloth.

The Ignition electrode

The electric ignition is obtained through a ceramic electrode and a metal electrode . Keep these components very clean, to avoid difficult lighting, and check that the burner crown holes are not obstructed.

11

Image 11
Contents TBG700 Welcome to the world of Electrolux Contents During Use Important Safety InformationInstallation Child SafetyEnvironmental Information ServiceDescription of the Hob Installation Lighting the burners Using the hob correctlyOperation Hob burners control knobsBurner Minimum Maximum Diameter Pan Supports Maintenance and CleaningHob Top Ignition electrode BurnersSomething Not Working? Symptom SolutionEngineer technical data Instructions for the InstallerType of GAS Location Important safety requirementsInstallation Gas Connection Cut Out Size Building over a kitchen unit with door BuildingBuilding over a cupboard or drawer Fitting the Hob into the Worktop This HOB Must be Earthed Electrical ConnectionsPermanent Connection Wiring DiagramPreliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignition System / Gas Ignition Commissioning Pressure TestingMethod Conversion from Natural Gas to LPGStandard Guarantee Conditions Service and Spare Parts European Guarantee Page 35674-6903 02/07 R.0