CLEARANCESREQUIRED
WHEN FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE
CLEARANCESREQUIRED
WHEN FITTING THE GAS HOB WITH A COOKER HOOD ABOVE
700 mm
100 | mm |
|
600 mm
400 mm
mm 55
50 | mm |
|
400 mm
50 | mm |
|
700 mm
100 | mm |
|
600 mm
400 mm
mm 55
400 mm
50 | mm |
|
50 | mm |
|
Installation
IMPORTANT
This hob must be installed by a competent person to the relevant Gas
Standards.
Any gas installation must be carried out by a registered competent person.
Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.
The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this instruction booklet be ignored.
On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment is fixed so that the washer is fitted between the components as shown in the diagram. Screw the parts together without using excessive force.
16