Frigidaire FRS6R4EQ2, FRS6R5EMB1, FRS6R5EMB3, FRS6R5EMB0, FRS23F4CW5, FRS23F4CW3 manual ICE Dispenser

Page 21

BEFORE YOU CALL (CONTINUED)

PROBLEM

CAUSE

CORRECTION

AUTOMATIC ICE MAKER (CONTINUED)

 

Ice maker is not making

• Ice maker is producing less ice

• Ice maker should produce approximately 4 – 5 pounds

enough ice.

than you expect.

of ice every 24 hours. Extra Ice should produce up to 8

 

 

pounds of ice every 24 hours.

 

• Freezer is not cold enough.

• See PROBLEM section TEMPERATURES ARE TOO

 

• Household water line valve is

WARM.

 

• Turn on household water line valve.

 

not completely open.

 

 

• Check to see if water

• If it is, replace the ice & water filter cartridge.

 

dispenser is dispensing slower

 

 

than normal.

 

 

 

 

Ice maker will not stop

• Ice maker wire signal arm is

• Move item and release wire signal arm. Remove any

making ice.

being held down by some item

ice cubes that are frozen together over the wire signal

 

in the freezer.

arm.

 

 

 

Ice maker is not separating

• Ice cubes are not being used

• Remove and shake ice container to separate cubes.

the ice cubes.

frequently enough.

 

 

• Ice cubes are hollow or smaller

• The ice & water filter cartridge may be clogged.

 

than normal.

Replace filter cartridge.

 

 

 

Ice has bad odor and taste.

• Ice has picked up odor or

• Cover foods tightly. Discard stale ice. Ice maker will

 

flavor from strong food stored

produce fresh supply.

 

in refrigerator or freezer.

 

 

• Water running to ice maker

• Add filter to water supply line. Consult a water

 

has poor taste or odor.

purifying company.

 

• Ice not used frequently enough.

• Discard stale ice.

 

 

 

ICE DISPENSER

 

 

 

 

 

Dispenser will not dispense

• Ice storage container is empty.

• When the first supply of ice is dropped into the

ice.

 

container, the dispenser should operate.

 

• Freezer temperature is set too

• Turn freezer control to a higher setting so that ice

 

warm.

cubes will be made. When first supply of ice is made,

 

• Household water line valve is

dispenser should operate.

 

• Open household water line valve. Allow sufficient time

 

not open.

for the ice to be made. When ice is made, the

 

 

dispenser should operate.

 

• Freezer door is not closed.

• Ensure freezer door is closed.

 

• Ice dispensing arm has been

• Motor is overloaded. Motor overload protector will

 

held in for more than 4-5

reset in approximately 3 minutes. Ice can then be

 

minutes.

dispensed.

 

 

 

Ice dispenser is jammed.

• Ice has melted and frozen

• Remove ice container, thaw, and empty the contents.

 

around auger due to infrequent

Clean container, wipe dry, and replace in proper

 

use, temperature fluctuations,

position. When new ice is made, dispenser should

 

and/or power outages.

operate.

 

• Ice cubes are jammed

• Remove ice cubes that are jamming the dispenser.

 

between ice maker and back

 

of ice container.

 

 

• Ice cubes are frozen together.

• Use the dispenser often so that cubes do not freeze

 

• Ice cubes are hollow or smaller

together.

 

• The ice & water filter cartridge could be clogged.

 

than normal.

Replace the filter cartridge. Dispensing system

 

 

operates best at 30 – 100 psi water pressure. Well

 

 

water pressures should fall within this range.

 

 

 

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Installation --Includes Connecting Solutions to Common ProblemsIce Maker To Water Supply Welcome & Congratulations Please Read and Save These InstructionsRegistration Card Included Withyour Foryour Safety Important Safety InstructionsChild Safety Proper Disposal Ofyour Refrigerator or FreezerInstallation Installation Connecting ICE Maker to Water Supply Before Installing The Water Supply Line,You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve Door Removal Instructions Door Removal InstructionsTo Remove Refrigerator Door To Remove Freezer DoorTemperature Adjustment Features AT a Glance Temperature ControlsCool Down Period Refrigerator & Freezer ControlsLooking Inside Tall Bottle Retainer Some Models Looking Inside Special Storage AreasCrispers Some Humidity Control Some ModelsAutomatic ICE and Water Dispenser Features may vary according to modelAutomatic ICE & Water Dispenser Operating Instructions Howthe Water Dispenser WorksCleaning the ICE Dispenser ICE and Water Dispenser FeaturesICE Dispenser Tips Remove and empty the ice storage bin ifSystem Startup Puresource TM * ICE and Water Filter Some ModelsChanging the Filter To change filterPURESOURCE2TM * ICE and Water Front Filter Some Models Resetting The Filter Status Light some modelsFood Storage & Energy Saving Ideas Normal Operating Sounds & Sights Care & Cleaning Replacing Light Bulbs Consumer Warranty InformationBefore YOU Call Temperatures are TOO ColdRunning of Refrigerator OPENING/CLOSING of DOORS/DRAWERSWATER/MOISTURE/FROST Inside Refrigerator Temperatures are TOO WarmWATER/MOISTURE/FROST Outside Refrigerator Automatic ICE MakerICE Dispenser Odors in Refrigerator Water DispenserOPENING/CLOSING of DOORS/DRAWERS Light Bulb is not on

FRS26FCDB0, FRS26FCDB3, FRS26FCDB5, FRS26FCDB4, FRS26FCDB6 specifications

The Frigidaire FRS23F4CQ0, FRS6R4EB1, FRS3R4EQ0, FRS6R5EMB3, and FRS3R4EW0 are popular refrigerator models that offer a combination of reliability, functionality, and modern design. These models cater to various consumer needs while providing a range of innovative features and technologies.

One of the standout features across these Frigidaire models is the SpaceWise Organization System, which allows users to customize the interior storage space. This system includes adjustable shelves, door bins, and specialized compartments that can easily accommodate larger items. The full-width freezer drawers facilitate easy access to frozen goods, minimizing the hassle of searching for items tucked away in the back.

Another significant characteristic is the adjustable Temperature Control system. This feature enables users to set and maintain the optimal temperature for fresh food and frozen items. With the additional MaxCool setting, users can quickly lower the temperature in the refrigerator to preserve the freshness of food items during loading.

The Frigidaire refrigerators also emphasize energy efficiency, featuring ENERGY STAR certification. This ensures that they operate with reduced energy consumption, contributing to lower utility bills while being environmentally friendly.

In terms of cooling technologies, these models often incorporate the Even Temp cooling system, designed to maintain an even temperature throughout the refrigerator. This technology minimizes temperature fluctuations, ensuring that food stays fresher longer. The addition of humidity-controlled crispers provides optimal storage conditions for fruits and vegetables, preventing spoilage.

The exterior design preferences are also addressed with a stainless steel finish, offering a sleek and modern look that complements any kitchen decor. Many models include easy-to-clean surfaces that resist fingerprints, maintaining an attractive appearance without constant upkeep.

Further enhancing user experience, the Frigidaire models feature quiet operation, minimizing noise levels, which is particularly advantageous in open-concept homes. The easy-to-read digital controls provide simple adjustability, ensuring that users can manage their fridge settings at their convenience.

In summary, the Frigidaire FRS23F4CQ0, FRS6R4EB1, FRS3R4EQ0, FRS6R5EMB3, and FRS3R4EW0 models offer a blend of innovative features, energy efficiency, customizable storage options, and robust cooling technologies. These refrigerators are designed to meet modern kitchen demands while enhancing overall usability and maintaining a stylish aesthetic.
Top Page Image Contents